NSN 9540-01-298-6998
Part Details | STRUCTURAL BEAM
9540-01-298-6998 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.
Alternate Parts: 340001307, 34000130-7, 9540-01-298-6998, 01-298-6998, 9540012986998, 012986998
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 95 | APR 20, 1989 | 01-298-6998 | 37018 ( BEAM, STRUCTURAL ) |
REFERENCE DRAWINGS & PICTURES
H SHAPE
SQUARE END
SQUARE W/ INNER AND OUTER CORNER RADII
SQUARE END
SQUARE W/ INNER AND OUTER CORNER RADII
SQUARE END
SQUARE W/ INNER AND OUTER CORNER RADII
SQUARE END
SQUARE W/ INNER AND OUTER CORNER RADII
Cross Reference | NSN 9540-01-298-6998
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 34000130-7 | 24995 | BECKLIN HOLDINGS, INC.DBA ECS CASE |
Technical Data | NSN 9540-01-298-6998
| Characteristic | Specifications |
|---|---|
| MATERIAL | ALUMINUM ALLOY 6063 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200 TO 9 FED SPEC 1ST MATERIAL RESPONSE |
| FABRICATION METHOD | EXTRUDED |
| SURFACE TREATMENT | ANODIZE |
| HEAT TREATMENT | T-52 SOLUTION HEAT TREATED |
| LENGTH | 16.000 FEET NOMINAL |
| BASIC SHAPE STYLE | H SHAPE |
| OVERALL WIDTH | 0.375 INCHES NOMINAL |
| LEFT SIDE FLANGE HEIGHT | 1.160 INCHES NOMINAL |
| RIGHT SIDE FLANGE HEIGHT | 1.160 INCHES NOMINAL |
| LEFT SIDE FLANGE THICKNESS | 0.093 INCHES NOMINAL |
| RIGHT SIDE FLANGE THICKNESS | 0.093 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.750 INCHES NOMINAL |
| LEFT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.510 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.750 INCHES NOMINAL |
| RIGHT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.510 INCHES NOMINAL |
| WEB FLANGE THICKNESS | 0.250 INCHES NOMINAL |
| LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| LEFT BOTTOM INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| RIGHT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| RIGHT BOTTOM INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| FIRST TIP STYLE | SQUARE END |
| SECOND TIP RELATIONSHIP TO FIRST TIP | NOT IDENTICAL |
| SECOND TIP STYLE | SQUARE W/ INNER AND OUTER CORNER RADII |
| SECOND TIP INNER RADIUS | 0.020 INCHES NOMINAL |
| SECOND TIP OUTER RADIUS | 0.020 INCHES NOMINAL |
| THIRD TIP RELATIONSHIP TO PRECEDING TIPS | NOT IDENTICAL |
| THIRD TIP STYLE | 4 SQUARE END |
| THIRD TIP TAPER LENGTH | 0.200 INCHES NOMINAL |
| THIRD TIP THICKNESS | 0.063 INCHES NOMINAL |
| FOURTH TIP RELATIONSHIP TO PRECEDING TIPS | NOT IDENTICAL |
| FOURTH TIP STYLE | 5 SQUARE END |
| FOURTH TIP TAPER LENGTH | 0.200 INCHES NOMINAL |
| FOURTH TIP THICKNESS | 0.063 INCHES NOMINAL |
| SPECIAL FEATURES | 2ND TIP OFFSET 0.093 IN. OUTSIDE; BOTTOM FLANGES 0.080 IN. THK,13.0667 DEG TAPER TIPS; TENSILE STRENGTH 22000 PSI MIN,30000 PSI MAX; HARDNESS WEBSTER SCALE 8.0 MIN,11.0 MAX; DP MATTE FIN.; FILLET RADIUS WHERE BOTTOM LEFT FLANGE JOINS WEB FLANGE,0.046 IN.; FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE,0.046 IN. |