NSN 9540-01-235-2885

Part Details | STRUCTURAL BEAM

9540-01-235-2885 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.

Alternate Parts: 75A3209952006, 75A320995-2006, 9540-01-235-2885, 01-235-2885, 9540012352885, 012352885

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
95JUN 27, 198601-235-288537018 ( BEAM, STRUCTURAL )
REFERENCE DRAWINGS & PICTURES

Z SHAPE

SQUARE END

SQUARE END

SQUARE END

SQUARE END

Cross Reference | NSN 9540-01-235-2885
Part Number Cage Code Manufacturer
75A320995-200676301BOEING COMPANY, THEDBA BOEING
Technical Data | NSN 9540-01-235-2885
Characteristic Specifications
MATERIAL ALUMINUM ALLOY 7075 AND ALUMINUM ALLOY 7072
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250 TO 13 FED SPEC 1ST MATERIAL RESPONSE
FABRICATION METHOD EXTRUDED
LENGTH0.675 FEET NOMINAL
BASIC SHAPE STYLE Z SHAPE
OVERALL HEIGHT2.230 INCHES MINIMUM AND 2.280 INCHES MAXIMUM
LEFT SIDE TOP FLANGE THICKNESS0.040 INCHES NOMINAL
RIGHT SIDE BOTTOM FLANGE THICKNESS0.040 INCHES NOMINAL
WEB FLANGE THICKNESS0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM
TOP FLANGE WIDTH2.250 INCHES NOMINAL
BOTTOM FLANGE WIDTH2.350 INCHES NOMINAL
LEFT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
RIGHT BOTTOM INSIDE ANGLE90.0 DEGREES NOMINAL
FIRST TIP STYLE SQUARE END
SECOND TIP RELATIONSHIP TO FIRST TIP IDENTICAL