NSN 9540-01-232-7034
Part Details | STRUCTURAL BEAM
9540-01-232-7034 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.
Alternate Parts: SS15134, SS1513-4, 9540-01-232-7034, 01-232-7034, 9540012327034, 012327034
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 95 | MAY 19, 1986 | 01-232-7034 | 37018 ( BEAM, STRUCTURAL ) |
REFERENCE DRAWINGS & PICTURES
Z SHAPE
SQUARE END
SQUARE W/ INNER AND OUTER CORNER RADII
SQUARE END
SQUARE W/ INNER AND OUTER CORNER RADII
SQUARE END
SQUARE W/ INNER AND OUTER CORNER RADII
SQUARE END
SQUARE W/ INNER AND OUTER CORNER RADII
Cross Reference | NSN 9540-01-232-7034
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| SS1513-4 | 78286 | SIKORSKY AIRCRAFT CORPORATIONDBA SIKORSKY |
Technical Data | NSN 9540-01-232-7034
| Characteristic | Specifications |
|---|---|
| FABRICATION METHOD | EXTRUDED |
| BASIC SHAPE STYLE | Z SHAPE |
| OVERALL HEIGHT | 1.000 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE THICKNESS | 0.063 INCHES NOMINAL |
| RIGHT SIDE BOTTOM FLANGE THICKNESS | 0.063 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL |
| FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL |
| WEB FLANGE THICKNESS | 0.063 INCHES NOMINAL |
| TOP FLANGE WIDTH | 0.750 INCHES NOMINAL |
| BOTTOM FLANGE WIDTH | 0.880 INCHES NOMINAL |
| LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| RIGHT BOTTOM INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| FIRST TIP STYLE | SQUARE END |
| SECOND TIP RELATIONSHIP TO FIRST TIP | NOT IDENTICAL |
| SECOND TIP STYLE | 8 SQUARE W/ INNER AND OUTER CORNER RADII |
| SECOND TIP INNER CORNER RADIUS | 0.125 INCHES NOMINAL |
| SECOND TIP THICKNESS | 0.063 INCHES NOMINAL |
| SECOND TIP FLANGE HEIGHT | 0.250 INCHES NOMINAL |