NSN 9540-01-085-6808
Part Details | STRUCTURAL BEAM
9540-01-085-6808 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.
Alternate Parts: QQA2003, QQ-A-200/3, 45091, K41A540, MS14377E001, 11363A, 11363-A, AMSQQA2003, AMS-QQ-A-200/3, 605561, 60-5561, 9540-01-085-6808, 01-085-6808, 9540010856808, 010856808
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 95 | NOV 12, 1979 | 01-085-6808 | 37018 ( BEAM, STRUCTURAL ) |
REFERENCE DRAWINGS & PICTURES
T SHAPE
SQUARE W/ INNER AND OUTER CORNER RADII
SQUARE W/ INNER AND OUTER CORNER RADII
SQUARE W/ INNER AND OUTER CORNER RADII
SQUARE W/ INNER AND OUTER CORNER RADII
Cross Reference | NSN 9540-01-085-6808
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| QQ-A-200/3 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
| 45091 | 27610 | INTERNATIONAL LIGHT METALS CORPSUB OF MARTIN MARIETTA CORP |
| K41A540 | 81755 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS |
| MS14377E001 | 96906 | MILITARY STANDARDSPROMULGATED BY MILITARY DEPARTMENTS |
| 11363-A | 55088 | PIMALCO INC.DIV ALCOA INC GLOBAL HARD ALLOY |
| AMS-QQ-A-200/3 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
| 60-5561 | 29321 | TRANSTAR METALS CORP |
Technical Data | NSN 9540-01-085-6808
| Characteristic | Specifications |
|---|---|
| MATERIAL | ALUMINUM ALLOY 2024 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200 TO 3 FED SPEC 1ST MATERIAL RESPONSE |
| FABRICATION METHOD | EXTRUDED |
| HEAT TREATMENT | O-ANNEALED |
| LENGTH | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM |
| BASIC SHAPE STYLE | T SHAPE |
| OVERALL HEIGHT | 1.800 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE THICKNESS | 0.125 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE THICKNESS | 0.125 INCHES NOMINAL |
| LEG THICKNESS | 0.100 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 1.050 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 1.050 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL |
| TOP FLANGE WIDTH | 2.100 INCHES NOMINAL |
| LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| RIGHT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| FIRST TIP STYLE | SQUARE W/ INNER AND OUTER CORNER RADII |
| FIRST TIP INNER RADIUS | 0.025 INCHES NOMINAL |
| FIRST TIP OUTER RADIUS | 0.025 INCHES NOMINAL |
| SECOND TIP RELATIONSHIP TO FIRST TIP | IDENTICAL |
| THIRD TIP RELATIONSHIP TO PRECEDING TIPS | IDENTICAL W/FIRST TIP |
| WEIGHT PER UNIT MEASURE | 0.523 POUNDS PER LINEAR FOOT |
| SPECIFICATION/STANDARD DATA | 81755-K41 MANUFACTURERS STANDARD |
| NONDEFINITIVE SPEC/STD DATA | O TEMPER |