NSN 9540-01-076-3313
Part Details | STRUCTURAL BEAM
9540-01-076-3313 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.
Alternate Parts: AND101381601, AND10138-1601, 9540-01-076-3313, 01-076-3313, 9540010763313, 010763313
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 95 | MAY 04, 1979 | 01-076-3313 | 37018 ( BEAM, STRUCTURAL ) |
REFERENCE DRAWINGS & PICTURES
Z SHAPE
UPPER RADIUS
LOWER RADIUS
UPPER RADIUS
LOWER RADIUS
UPPER RADIUS
LOWER RADIUS
UPPER RADIUS
LOWER RADIUS
Cross Reference | NSN 9540-01-076-3313
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| AND10138-1601 | 99237 | AIRFORCE-NAVY AERONAUTICAL DESIGNSTANDARD |
Technical Data | NSN 9540-01-076-3313
| Characteristic | Specifications |
|---|---|
| MATERIAL | ALUMINUM ALLOY 2024 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200 TO 3 FED SPEC 1ST MATERIAL RESPONSE |
| FABRICATION METHOD | EXTRUDED |
| HEAT TREATMENT | T-3511 SOLUTION HEAT TREATED |
| LENGTH | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM |
| BASIC SHAPE STYLE | 1 Z SHAPE |
| OVERALL HEIGHT | 1.750 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE THICKNESS | 0.078 INCHES NOMINAL |
| RIGHT SIDE BOTTOM FLANGE THICKNESS | 0.078 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL |
| FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL |
| WEB FLANGE THICKNESS | 0.078 INCHES NOMINAL |
| TOP FLANGE WIDTH | 0.500 INCHES NOMINAL |
| BOTTOM FLANGE WIDTH | 0.750 INCHES NOMINAL |
| LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| RIGHT BOTTOM INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| FIRST TIP STYLE | LOWER RADIUS |
| FIRST TIP RADIUS | 0.078 INCHES NOMINAL |
| SECOND TIP RELATIONSHIP TO FIRST TIP | NOT IDENTICAL |
| SECOND TIP STYLE | UPPER RADIUS |
| SECOND TIP RADIUS | 0.078 INCHES NOMINAL |
| WEIGHT PER UNIT MEASURE | 0.294 POUNDS PER LINEAR FOOT |
| NONDEFINITIVE SPEC/STD DATA | 2024 ALLOY AND T3511 TEMPER |