NSN 9540-01-032-4191
Part Details | STRUCTURAL BEAM
9540-01-032-4191 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.
Alternate Parts: LS10742, LS1074-2, 9540-01-032-4191, 01-032-4191, 9540010324191, 010324191
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 95 | DEC 15, 1976 | 01-032-4191 | 37018 ( BEAM, STRUCTURAL ) |
REFERENCE DRAWINGS & PICTURES
T SHAPE
SQUARE W/ INNER AND OUTER CORNER RADII
SQUARE W/ INNER AND OUTER CORNER RADII
SQUARE W/ INNER AND OUTER CORNER RADII
SQUARE W/ INNER AND OUTER CORNER RADII
Cross Reference | NSN 9540-01-032-4191
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| LS1074-2 | 98897 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS |
Technical Data | NSN 9540-01-032-4191
| Characteristic | Specifications |
|---|---|
| MATERIAL | ALUMINUM ALLOY 2024 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200 TO 3 FED SPEC 1ST MATERIAL RESPONSE |
| FABRICATION METHOD | EXTRUDED |
| HEAT TREATMENT | STRESS RELIEVED |
| LENGTH | 12.000 FEET NOMINAL |
| BASIC SHAPE STYLE | T SHAPE |
| OVERALL HEIGHT | 1.609 INCHES MINIMUM AND 1.641 INCHES MAXIMUM |
| LEFT SIDE TOP FLANGE THICKNESS | 0.149 INCHES MINIMUM AND 0.163 INCHES MAXIMUM |
| RIGHT SIDE TOP FLANGE THICKNESS | 0.149 INCHES MINIMUM AND 0.163 INCHES MAXIMUM |
| LEG THICKNESS | 0.149 INCHES MINIMUM AND 0.163 INCHES MAXIMUM |
| LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.805 INCHES MINIMUM AND 0.820 INCHES MAXIMUM |
| RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.805 INCHES MINIMUM AND 0.820 INCHES MAXIMUM |
| FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| TOP FLANGE WIDTH | 1.609 INCHES MINIMUM AND 1.641 INCHES MAXIMUM |
| LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| RIGHT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| FIRST TIP STYLE | SQUARE W/ INNER AND OUTER CORNER RADII |
| FIRST TIP INNER RADIUS | 0.016 INCHES MINIMUM AND 0.048 INCHES MAXIMUM |
| FIRST TIP OUTER RADIUS | 0.016 INCHES MINIMUM AND 0.048 INCHES MAXIMUM |
| SECOND TIP RELATIONSHIP TO FIRST TIP | IDENTICAL |
| THIRD TIP RELATIONSHIP TO PRECEDING TIPS | IDENTICAL W/FIRST TIP |
| WEIGHT PER UNIT MEASURE | 0.488 POUNDS PER LINEAR FOOT |
| SPECIFICATION/STANDARD DATA | 98897-LS1074 MANUFACTURERS STANDARD |
| USAGE DESIGN | STRUCTURAL |
| SUPPLEMENTARY FEATURES | PROCURED IN A QQ-A-200/3 BASIC TEMPER /T3/ AND SUBSEQUENTLY SOLUTION HEAT TREATED BY USER TO PRECIPITATION HEAT TREAT STRESS-RELIEVED T6 TEMPER DESIGNATION MIL-H-6088 TABLE VIT |