NSN 9540-01-029-9062
Part Details | STRUCTURAL BEAM
9540-01-029-9062 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.
Alternate Parts: 61128, 1M5164, 1MA160D0310218, 1MA160D03-10218, QQA20011, QQ-A-200/11, MS14372E071, AMSQQA20011, AMS-QQ-A-200/11, 604254, 60-4254, PA6211, 9540-01-029-9062, 01-029-9062, 9540010299062, 010299062
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 95 | OCT 25, 1976 | 01-029-9062 | 37018 ( BEAM, STRUCTURAL ) |
REFERENCE DRAWINGS & PICTURES
T SHAPE
SQUARE END
SQUARE END
SQUARE END
SQUARE END
Cross Reference | NSN 9540-01-029-9062
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 61128 | 01634 | ALUMINUM CO OF AMERICA |
| 1M5164 | 76301 | BOEING COMPANY, THEDBA BOEING |
| 1MA160D03-10218 | 76301 | BOEING COMPANY, THEDBA BOEING |
| QQ-A-200/11 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
| MS14372E071 | 96906 | MILITARY STANDARDSPROMULGATED BY MILITARY DEPARTMENTS |
| AMS-QQ-A-200/11 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
| 60-4254 | 29321 | TRANSTAR METALS CORP |
| PA6211 | 06012 | TRANSTAR METALS CORP |
Technical Data | NSN 9540-01-029-9062
| Characteristic | Specifications |
|---|---|
| FABRICATION METHOD | EXTRUDED |
| HEAT TREATMENT | O-ANNEALED |
| LENGTH | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM |
| BASIC SHAPE STYLE | T SHAPE |
| OVERALL HEIGHT | 2.190 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE THICKNESS | 0.064 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE THICKNESS | 0.064 INCHES NOMINAL |
| LEG THICKNESS | 0.064 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 1.200 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 1.200 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.130 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.130 INCHES NOMINAL |
| TOP FLANGE WIDTH | 2.400 INCHES NOMINAL |
| LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| RIGHT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| FIRST TIP STYLE | SQUARE END |
| SECOND TIP RELATIONSHIP TO FIRST TIP | IDENTICAL |
| THIRD TIP RELATIONSHIP TO PRECEDING TIPS | IDENTICAL W/FIRST TIP |
| WEIGHT PER UNIT MEASURE | 0.324 POUNDS PER LINEAR FOOT |
| NONDEFINITIVE SPEC/STD DATA | TO TEMPER |