NSN 9540-01-014-1303

Part Details | STRUCTURAL BEAM

9540-01-014-1303 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.

Alternate Parts: 28725, QQA2007, QQ-A-200/7, 28725, AMSQQA2007, AMS-QQ-A-200/7, 9540-01-014-1303, 01-014-1303, 9540010141303, 010141303

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
95DEC 15, 197501-014-130337018 ( BEAM, STRUCTURAL )
REFERENCE DRAWINGS & PICTURES

T SHAPE

Cross Reference | NSN 9540-01-014-1303
Part Number Cage Code Manufacturer
2872577783ALCOA/REYNOLDS METALS COMPANY
QQ-A-200/781348FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES
2872589849RYERSON JOSEPH T AND SON INC SUB OFINLAND STEEL CORP
AMS-QQ-A-200/781343SOCIETY OF AUTOMOTIVE ENGINEERS INC
Technical Data | NSN 9540-01-014-1303
Characteristic Specifications
FABRICATION METHOD EXTRUDED
HEAT TREATMENT H-111 STRAIN HARDENED
LENGTH20.000 FEET MINIMUM AND 30.000 FEET MAXIMUM
BASIC SHAPE STYLE T SHAPE
OVERALL HEIGHT5.000 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS0.282 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS0.282 INCHES NOMINAL
LEG THICKNESS0.188 INCHES NOMINAL
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES2.250 INCHES NOMINAL
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES2.250 INCHES NOMINAL
TOP FLANGE WIDTH4.500 INCHES NOMINAL
LEFT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
RIGHT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
WEIGHT PER UNIT MEASURE2.523 POUNDS PER LINEAR FOOT
NONDEFINITIVE SPEC/STD DATAH111 TEMPER