NSN 9540-01-014-1300
Part Details | STRUCTURAL BEAM
9540-01-014-1300 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.
Alternate Parts: 28729B, 28729-B, QQA2007, QQ-A-200/7, 28729, AMSQQA2007, AMS-QQ-A-200/7, 0T7040, 6020834, 60-20834, 9540-01-014-1300, 01-014-1300, 9540010141300, 010141300
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 95 | DEC 15, 1975 | 01-014-1300 | 37018 ( BEAM, STRUCTURAL ) |
REFERENCE DRAWINGS & PICTURES
T SHAPE
Cross Reference | NSN 9540-01-014-1300
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 28729-B | 77783 | ALCOA/REYNOLDS METALS COMPANY |
| QQ-A-200/7 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
| 28729 | 89849 | RYERSON JOSEPH T AND SON INC SUB OFINLAND STEEL CORP |
| AMS-QQ-A-200/7 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
| 0T7040 | 3T677 | TABER EXTRUSIONS, LLCDBA TABLER METALS GULFPORT |
| 60-20834 | 29321 | TRANSTAR METALS CORP |
Technical Data | NSN 9540-01-014-1300
| Characteristic | Specifications |
|---|---|
| FABRICATION METHOD | EXTRUDED |
| HEAT TREATMENT | H-111 STRAIN HARDENED |
| LENGTH | 20.000 FEET MINIMUM AND 30.000 FEET MAXIMUM |
| BASIC SHAPE STYLE | T SHAPE |
| OVERALL HEIGHT | 8.000 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE THICKNESS | 0.396 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE THICKNESS | 0.396 INCHES NOMINAL |
| LEG THICKNESS | 0.258 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 2.375 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 2.375 INCHES NOMINAL |
| TOP FLANGE WIDTH | 4.750 INCHES NOMINAL |
| LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| RIGHT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| WEIGHT PER UNIT MEASURE | 4.501 POUNDS PER LINEAR FOOT |
| NONDEFINITIVE SPEC/STD DATA | H111 TEMPER |