NSN 9540-00-982-2589
Part Details | STRUCTURAL BEAM
9540-00-982-2589 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.
Alternate Parts: QQA2008, QQA200-8, 9540-00-982-2589, 00-982-2589, 9540009822589, 009822589
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 95 | JAN 01, 1962 | 00-982-2589 | 37018 ( BEAM, STRUCTURAL ) |
REFERENCE DRAWINGS & PICTURES
I SHAPE
UPPER RADIUS
LOWER RADIUS
UPPER RADIUS
LOWER RADIUS
UPPER RADIUS
LOWER RADIUS
UPPER RADIUS
LOWER RADIUS
Cross Reference | NSN 9540-00-982-2589
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| QQA200-8 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
Technical Data | NSN 9540-00-982-2589
| Characteristic | Specifications |
|---|---|
| MATERIAL | 1$2 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200 TO 8 FED SPEC 1ST MATERIAL RESPONSE |
| FABRICATION METHOD | EXTRUDED |
| HEAT TREATMENT | K$DHT |
| LENGTH | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM |
| BASIC SHAPE STYLE | I SHAPE |
| OVERALL HEIGHT | 3.000 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE THICKNESS | 0.270 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE THICKNESS | 0.270 INCHES NOMINAL |
| RIGHT SIDE BOTTOM FLANGE THICKNESS | 0.270 INCHES NOMINAL |
| LEFT SIDE BOTTOM FLANGE THICKNESS | 0.270 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 1.254 INCHES NOMINAL |
| LEFT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 1.254 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 1.254 INCHES NOMINAL |
| RIGHT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 1.254 INCHES NOMINAL |
| WEB FLANGE THICKNESS | 0.349 INCHES NOMINAL |
| TOP FLANGE WIDTH | 2.509 INCHES NOMINAL |
| BOTTOM FLANGE WIDTH | 2.509 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE TIP THICKNESS | 0.170 INCHES NOMINAL |
| LEFT SIDE BOTTOM FLANGE TIP THICKNESS | 0.170 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE TIP THICKNESS | 0.170 INCHES NOMINAL |
| RIGHT SIDE BOTTOM FLANGE TIP THICKNESS | 0.170 INCHES NOMINAL |
| LEFT TOP INNER FACE TO OUTER FACE ANGLE | 90.0 DEGREES NOMINAL |
| LEFT BOTTOM INNER FACE TO OUTER FACE ANGLE | 90.0 DEGREES NOMINAL |
| RIGHT TOP INNER FACE TO OUTER FACE ANGLE | 90.0 DEGREES NOMINAL |
| RIGHT BOTTOM INNER FACE TO OUTER FACE ANGLE | 90.0 DEGREES NOMINAL |
| FIRST TIP STYLE | LOWER RADIUS |
| FIRST TIP RADIUS | 0.100 INCHES NOMINAL |
| SECOND TIP RELATIONSHIP TO FIRST TIP | IDENTICAL |
| SECOND TIP RADIUS | 0.100 INCHES NOMINAL |
| THIRD TIP RELATIONSHIP TO PRECEDING TIPS | NOT IDENTICAL |
| THIRD TIP STYLE | UPPER RADIUS |
| THIRD TIP RADIUS | 0.100 INCHES NOMINAL |
| FOURTH TIP RELATIONSHIP TO PRECEDING TIPS | IDENTICAL W/THIRD TIP |
| FOURTH TIP RADIUS | 0.100 INCHES NOMINAL |
| WEIGHT PER UNIT MEASURE | 2.670 POUNDS PER LINEAR FOOT |
| NONDEFINITIVE SPEC/STD DATA | T6 TEMPER |