NSN 9540-00-982-2586
Part Details | STRUCTURAL BEAM
9540-00-982-2586 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.
Alternate Parts: QQA270, 9540-00-982-2586, 00-982-2586, 9540009822586, 009822586
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 95 | JAN 01, 1962 | 00-982-2586 | 37018 ( BEAM, STRUCTURAL ) |
REFERENCE DRAWINGS & PICTURES
H SHAPE
RIGHT QUARTER RADIUS
LEFT QUARTER RADIUS
RIGHT QUARTER RADIUS
LEFT QUARTER RADIUS
RIGHT QUARTER RADIUS
LEFT QUARTER RADIUS
RIGHT QUARTER RADIUS
LEFT QUARTER RADIUS
Cross Reference | NSN 9540-00-982-2586
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| QQA270 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
Technical Data | NSN 9540-00-982-2586
| Characteristic | Specifications |
|---|---|
| MATERIAL | 1$2 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200 TO 8 FED SPEC 1ST MATERIAL RESPONSE |
| FABRICATION METHOD | EXTRUDED |
| HEAT TREATMENT | T-6 SOLUTION HEAT TREATED AND ARTIFICALLY AGED |
| LENGTH | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM |
| BASIC SHAPE STYLE | H SHAPE |
| OVERALL HEIGHT | 4.000 INCHES NOMINAL |
| OVERALL WIDTH | 4.000 INCHES NOMINAL |
| RIGHT SIDE FLANGE HEIGHT | 4.000 INCHES NOMINAL |
| LEFT SIDE FLANGE THICKNESS | 0.290 INCHES NOMINAL |
| RIGHT SIDE FLANGE THICKNESS | 0.290 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 2.000 INCHES NOMINAL |
| LEFT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 2.000 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 2.000 INCHES NOMINAL |
| RIGHT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 2.000 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.313 INCHES NOMINAL |
| FILLET RADIUS WHERE BOTTOM LEFT FLANGE JOINS WEB FLANGE/LEG | 0.313 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.313 INCHES NOMINAL |
| FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.313 INCHES NOMINAL |
| WEB FLANGE THICKNESS | 0.313 INCHES NOMINAL |
| LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| LEFT BOTTOM INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| RIGHT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| RIGHT BOTTOM INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| FIRST TIP STYLE | RIGHT QUARTER RADIUS |
| FIRST TIP RADIUS | 0.145 INCHES NOMINAL |
| SECOND TIP RELATIONSHIP TO FIRST TIP | NOT IDENTICAL |
| SECOND TIP STYLE | LEFT QUARTER RADIUS |
| SECOND TIP RADIUS | 0.145 INCHES NOMINAL |
| THIRD TIP RELATIONSHIP TO PRECEDING TIPS | IDENTICAL W/FIRST TIP |
| FOURTH TIP RELATIONSHIP TO PRECEDING TIPS | IDENTICAL W/SECOND TIP |
| WEIGHT PER UNIT MEASURE | 4.850 POUNDS PER LINEAR FOOT |
| NONDEFINITIVE SPEC/STD DATA | PALUMINUM ALLOY 6061$JTPT6 |