NSN 9540-00-595-8597
Part Details | STRUCTURAL BEAM
9540-00-595-8597 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.
Alternate Parts: 38355, QQA20011, QQA200-11, 120001, AMSQQA20011, AMS-QQA200-11, 9540-00-595-8597, 00-595-8597, 9540005958597, 005958597
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 95 | JAN 01, 1963 | 00-595-8597 | 37018 ( BEAM, STRUCTURAL ) |
REFERENCE DRAWINGS & PICTURES
Z SHAPE
FULL RADIUS
SQUARE W/ INNER AND OUTER CORNER RADII
FULL RADIUS
SQUARE W/ INNER AND OUTER CORNER RADII
FULL RADIUS
SQUARE W/ INNER AND OUTER CORNER RADII
FULL RADIUS
SQUARE W/ INNER AND OUTER CORNER RADII
Cross Reference | NSN 9540-00-595-8597
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 38355 | 01634 | ALUMINUM CO OF AMERICA |
| QQA200-11 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
| 120001 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATIONDIV MISSION SYSTEMS |
| AMS-QQA200-11 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
Technical Data | NSN 9540-00-595-8597
| Characteristic | Specifications |
|---|---|
| MATERIAL | ALUMINUM ALLOY 7075 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200 TO 11 FED SPEC 1ST MATERIAL RESPONSE |
| FABRICATION METHOD | EXTRUDED |
| HEAT TREATMENT | T-6 SOLUTION HEAT TREATED |
| LENGTH | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM |
| BASIC SHAPE STYLE | 6 Z SHAPE |
| OVERALL HEIGHT | 1.875 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE THICKNESS | 0.064 INCHES NOMINAL |
| RIGHT SIDE BOTTOM FLANGE THICKNESS | 0.064 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL |
| FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL |
| WEB FLANGE THICKNESS | 0.064 INCHES NOMINAL |
| TOP FLANGE WIDTH | 0.750 INCHES NOMINAL |
| BOTTOM FLANGE WIDTH | 0.938 INCHES NOMINAL |
| OUTER RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE | 0.125 INCHES NOMINAL |
| LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| RIGHT BOTTOM INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| FIRST TIP STYLE | FULL RADIUS |
| FIRST TIP INNER CORNER RADIUS | 0.125 INCHES NOMINAL |
| FIRST TIP OUTER CORNER RADIUS | 0.125 INCHES NOMINAL |
| FIRST TIP THICKNESS | 0.064 INCHES NOMINAL |
| FIRST TIP FLANGE HEIGHT | 0.250 INCHES NOMINAL |
| SECOND TIP RELATIONSHIP TO FIRST TIP | NOT IDENTICAL |
| SECOND TIP STYLE | 5 SQUARE W/ INNER AND OUTER CORNER RADII |
| SECOND TIP INNER CORNER RADIUS | 0.125 INCHES NOMINAL |
| SECOND TIP THICKNESS | 0.064 INCHES NOMINAL |
| SECOND TIP FLANGE HEIGHT | 0.189 INCHES NOMINAL |
| WEIGHT PER UNIT MEASURE | 0.310 POUNDS PER LINEAR FOOT |
| NONDEFINITIVE SPEC/STD DATA | T6 TEMPER |