NSN 9540-00-556-9180
Part Details | STRUCTURAL BEAM
9540-00-556-9180 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.
Alternate Parts: QQA20011, QQ-A-200/11, LS6709, AMSQQA20011, AMS-QQ-A-200/11, PA13140, 9540-00-556-9180, 00-556-9180, 9540005569180, 005569180
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 95 | NOV 08, 1974 | 00-556-9180 | 37018 ( BEAM, STRUCTURAL ) |
REFERENCE DRAWINGS & PICTURES
Z SHAPE
FULL RADIUS
SQUARE W/ INNER AND OUTER CORNER RADII
FULL RADIUS
SQUARE W/ INNER AND OUTER CORNER RADII
FULL RADIUS
SQUARE W/ INNER AND OUTER CORNER RADII
FULL RADIUS
SQUARE W/ INNER AND OUTER CORNER RADII
Cross Reference | NSN 9540-00-556-9180
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| QQ-A-200/11 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
| LS6709 | 98897 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS |
| AMS-QQ-A-200/11 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
| PA13140 | 06012 | TRANSTAR METALS CORP |
Technical Data | NSN 9540-00-556-9180
| Characteristic | Specifications |
|---|---|
| FABRICATION METHOD | EXTRUDED |
| HEAT TREATMENT | T-6 SOLUTION HEAT TREATED |
| LENGTH | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM |
| BASIC SHAPE STYLE | Z SHAPE |
| OVERALL HEIGHT | 1.500 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE THICKNESS | 0.093 INCHES NOMINAL |
| RIGHT SIDE BOTTOM FLANGE THICKNESS | 0.063 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.094 INCHES NOMINAL |
| FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.094 INCHES NOMINAL |
| WEB FLANGE THICKNESS | 0.063 INCHES NOMINAL |
| TOP FLANGE WIDTH | 0.630 INCHES NOMINAL |
| BOTTOM FLANGE WIDTH | 0.800 INCHES NOMINAL |
| OUTER RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE | 0.031 INCHES NOMINAL |
| OUTER RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE | 0.031 INCHES NOMINAL |
| LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| RIGHT BOTTOM INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| FIRST TIP STYLE | SQUARE W/ INNER AND OUTER CORNER RADII |
| FIRST TIP INNER RADIUS | 0.031 INCHES NOMINAL |
| FIRST TIP OUTER RADIUS | 0.031 INCHES NOMINAL |
| SECOND TIP RELATIONSHIP TO FIRST TIP | NOT IDENTICAL |
| SECOND TIP STYLE | FULL RADIUS |
| SECOND TIP RADIUS | 0.031 INCHES NOMINAL |
| WEIGHT PER UNIT MEASURE | 0.240 POUNDS PER LINEAR FOOT |
| NONDEFINITIVE SPEC/STD DATA | T6 TEMPER |