NSN 9540-00-542-2766
Part Details | STRUCTURAL BEAM
9540-00-542-2766 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.
Alternate Parts: 4712, 853G, QQA2005, QQ-A-200/5, AMSQQA2005, AMS-QQ-A-200/5, PA14820, 9540-00-542-2766, 00-542-2766, 9540005422766, 005422766
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 95 | JAN 01, 1961 | 00-542-2766 | 37018 ( BEAM, STRUCTURAL ) |
REFERENCE DRAWINGS & PICTURES
T SHAPE
SQUARE END
SQUARE END
SQUARE END
SQUARE END
Cross Reference | NSN 9540-00-542-2766
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 4712 | 77783 | ALCOA/REYNOLDS METALS COMPANY |
| 853G | 01634 | ALUMINUM CO OF AMERICA |
| QQ-A-200/5 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
| AMS-QQ-A-200/5 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
| PA14820 | 06012 | TRANSTAR METALS CORP |
Technical Data | NSN 9540-00-542-2766
| Characteristic | Specifications |
|---|---|
| MATERIAL | ALUMINUM ALLOY 5086 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200 TO 5 FED SPEC 1ST MATERIAL RESPONSE |
| FABRICATION METHOD | EXTRUDED |
| HEAT TREATMENT | H-111 STRAIN HARDENED |
| LENGTH | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM |
| BASIC SHAPE STYLE | T SHAPE |
| OVERALL HEIGHT | 1.500 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE THICKNESS | 0.281 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE THICKNESS | 0.281 INCHES NOMINAL |
| LEG THICKNESS | 0.281 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.750 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.750 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.188 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.188 INCHES NOMINAL |
| TOP FLANGE WIDTH | 1.500 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE TIP THICKNESS | 0.250 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE TIP THICKNESS | 0.250 INCHES NOMINAL |
| LEG TIP THICKNESS | 0.250 INCHES NOMINAL |
| LEFT TOP INNER FACE TO OUTER FACE ANGLE | 90.0 DEGREES NOMINAL |
| RIGHT TOP INNER FACE TO OUTER FACE ANGLE | 90.0 DEGREES NOMINAL |
| FIRST TIP STYLE | SQUARE END |
| SECOND TIP RELATIONSHIP TO FIRST TIP | IDENTICAL |
| THIRD TIP RELATIONSHIP TO PRECEDING TIPS | IDENTICAL W/FIRST TIP |
| WEIGHT PER UNIT MEASURE | 0.890 POUNDS PER LINEAR FOOT |
| NONDEFINITIVE SPEC/STD DATA | H111 TEMPER |