NSN 9540-00-492-3465
Part Details | STRUCTURAL BEAM
9540-00-492-3465 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.
Alternate Parts: 1MA161B0110008, 1MA161B01-10008, QQA2003, QQ-A-200/3, AMSQQA2003, AMS-QQ-A-200/3, 9540-00-492-3465, 00-492-3465, 9540004923465, 004923465
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 95 | JUL 02, 1974 | 00-492-3465 | 37018 ( BEAM, STRUCTURAL ) |
REFERENCE DRAWINGS & PICTURES
T SHAPE
SQUARE END
LEFT BULBOUS
SQUARE END
LEFT BULBOUS
SQUARE END
LEFT BULBOUS
SQUARE END
LEFT BULBOUS
Cross Reference | NSN 9540-00-492-3465
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 1MA161B01-10008 | 76301 | BOEING COMPANY, THEDBA BOEING |
| QQ-A-200/3 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
| AMS-QQ-A-200/3 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
Technical Data | NSN 9540-00-492-3465
| Characteristic | Specifications |
|---|---|
| FABRICATION METHOD | EXTRUDED |
| HEAT TREATMENT | O-ANNEALED |
| LENGTH | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM |
| BASIC SHAPE STYLE | T SHAPE |
| OVERALL HEIGHT | 1.250 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE THICKNESS | 0.040 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE THICKNESS | 0.040 INCHES NOMINAL |
| LEG THICKNESS | 0.040 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.830 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.870 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.130 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.130 INCHES NOMINAL |
| TOP FLANGE WIDTH | 1.700 INCHES NOMINAL |
| LEFT TOP INSIDE ANGLE | 89.0 DEGREES NOMINAL |
| RIGHT TOP INSIDE ANGLE | 91.0 DEGREES NOMINAL |
| FIRST TIP STYLE | SQUARE END |
| SECOND TIP RELATIONSHIP TO FIRST TIP | IDENTICAL |
| THIRD TIP RELATIONSHIP TO PRECEDING TIPS | NOT IDENTICAL |
| THIRD TIP STYLE | LEFT BULBOUS |
| THIRD TIP RADIUS | 0.060 INCHES NOMINAL |
| THIRD TIP DIAMETER | 0.060 INCHES NOMINAL |
| WEIGHT PER UNIT MEASURE | 0.156 POUNDS PER LINEAR FOOT |
| NONDEFINITIVE SPEC/STD DATA | O TEMPER |