NSN 9540-00-414-3292
Part Details | STRUCTURAL BEAM
9540-00-414-3292 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.
Alternate Parts: 10006, QQA2003, QQA200-3, 58102, LS4501, AMSQQA2003, AMS-QQA200-3, PA1464, 9540-00-414-3292, 00-414-3292, 9540004143292, 004143292
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 95 | FEB 02, 1972 | 00-414-3292 | 37018 ( BEAM, STRUCTURAL ) |
REFERENCE DRAWINGS & PICTURES
T SHAPE
SQUARE END
LEFT BULBOUS
SQUARE END
LEFT BULBOUS
SQUARE END
LEFT BULBOUS
SQUARE END
LEFT BULBOUS
Cross Reference | NSN 9540-00-414-3292
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 10006 | 77783 | ALCOA/REYNOLDS METALS COMPANY |
| QQA200-3 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
| 58102 | 27610 | INTERNATIONAL LIGHT METALS CORPSUB OF MARTIN MARIETTA CORP |
| LS4501 | 98897 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS |
| AMS-QQA200-3 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
| PA1464 | 06012 | TRANSTAR METALS CORP |
Technical Data | NSN 9540-00-414-3292
| Characteristic | Specifications |
|---|---|
| MATERIAL | ALUMINUM ALLOY 2024 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200 TO 3 FED SPEC 1ST MATERIAL RESPONSE |
| FABRICATION METHOD | EXTRUDED |
| HEAT TREATMENT | T-4 SOLUTION HEAT TREATED |
| LENGTH | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM |
| BASIC SHAPE STYLE | T SHAPE |
| OVERALL HEIGHT | 1.062 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE THICKNESS | 0.081 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE THICKNESS | 0.081 INCHES NOMINAL |
| LEG THICKNESS | 0.062 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 1.000 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 1.000 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.090 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.090 INCHES NOMINAL |
| TOP FLANGE WIDTH | 2.000 INCHES NOMINAL |
| LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| RIGHT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| FIRST TIP STYLE | 0 SQUARE END |
| FIRST TIP RADIUS | 0.016 INCHES NOMINAL |
| FIRST TIP DIAMETER | 0.250 INCHES NOMINAL |
| SECOND TIP RELATIONSHIP TO FIRST TIP | IDENTICAL |
| THIRD TIP RELATIONSHIP TO PRECEDING TIPS | NOT IDENTICAL |
| THIRD TIP STYLE | LEFT BULBOUS |
| THIRD TIP RADIUS | 0.120 INCHES NOMINAL |
| THIRD TIP DIAMETER | 0.250 INCHES NOMINAL |
| WEIGHT PER UNIT MEASURE | 0.320 POUNDS PER LINEAR FOOT |
| NONDEFINITIVE SPEC/STD DATA | T4 TEMPER |