NSN 9540-00-288-0454
Part Details | STRUCTURAL BEAM
9540-00-288-0454 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.
Alternate Parts: 26097, 29003, QQA2003, QQ-A-200/3, AMSQQA2003, AMS-QQ-A-200/3, PA11015, 605711, 60-5711, 9540-00-288-0454, 00-288-0454, 9540002880454, 002880454
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 95 | JAN 01, 1963 | 00-288-0454 | 37018 ( BEAM, STRUCTURAL ) |
REFERENCE DRAWINGS & PICTURES
I SHAPE
SQUARE END
SQUARE END
SQUARE END
SQUARE END
Cross Reference | NSN 9540-00-288-0454
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 26097 | 77783 | ALCOA/REYNOLDS METALS COMPANY |
| 29003 | 01634 | ALUMINUM CO OF AMERICA |
| QQ-A-200/3 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
| AMS-QQ-A-200/3 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
| PA11015 | 06012 | TRANSTAR METALS CORP |
| 60-5711 | 29321 | TRANSTAR METALS CORP |
Technical Data | NSN 9540-00-288-0454
| Characteristic | Specifications |
|---|---|
| MATERIAL | ALUMINUM ALLOY 2024 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200 TO 3 FED SPEC 1ST MATERIAL RESPONSE |
| FABRICATION METHOD | EXTRUDED |
| HEAT TREATMENT | T-3511 SOLUTION HEAT TREATED |
| LENGTH | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM |
| BASIC SHAPE STYLE | I SHAPE |
| OVERALL HEIGHT | 3.750 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE THICKNESS | 0.078 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE THICKNESS | 0.078 INCHES NOMINAL |
| RIGHT SIDE BOTTOM FLANGE THICKNESS | 0.078 INCHES NOMINAL |
| LEFT SIDE BOTTOM FLANGE THICKNESS | 0.078 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.875 INCHES NOMINAL |
| LEFT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.875 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.875 INCHES NOMINAL |
| RIGHT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.875 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL |
| FILLET RADIUS WHERE BOTTOM LEFT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL |
| FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL |
| WEB FLANGE THICKNESS | 0.078 INCHES NOMINAL |
| TOP FLANGE WIDTH | 1.750 INCHES NOMINAL |
| BOTTOM FLANGE WIDTH | 1.750 INCHES NOMINAL |
| LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| LEFT BOTTOM INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| RIGHT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| RIGHT BOTTOM INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| FIRST TIP STYLE | 0 SQUARE END |
| FIRST TIP RADIUS | 0.062 INCHES NOMINAL |
| FIRST TIP DIAMETER | 0.188 INCHES NOMINAL |
| SECOND TIP RELATIONSHIP TO FIRST TIP | IDENTICAL |
| THIRD TIP RELATIONSHIP TO PRECEDING TIPS | NOT IDENTICAL |
| THIRD TIP STYLE | SQUARE END |
| THIRD TIP RADIUS | 0.062 INCHES NOMINAL |
| THIRD TIP DIAMETER | 0.188 INCHES NOMINAL |
| FOURTH TIP RELATIONSHIP TO PRECEDING TIPS | IDENTICAL W/THIRD TIP |
| WEIGHT PER UNIT MEASURE | 0.755 POUNDS PER LINEAR FOOT |
| NONDEFINITIVE SPEC/STD DATA | T3511 TEMPER |