NSN 9540-00-261-5623
Part Details | STRUCTURAL BEAM
9540-00-261-5623 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.
Alternate Parts: 36542, QQA2003, QQ-A-200/3, 113522, 11352-2, LS3701, 5807, AMSQQA2003, AMS-QQ-A-200/3, 9540-00-261-5623, 00-261-5623, 9540002615623, 002615623
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 95 | JAN 01, 1963 | 00-261-5623 | 37018 ( BEAM, STRUCTURAL ) |
REFERENCE DRAWINGS & PICTURES
H SHAPE
SQUARE END
RIGHT BULBOUS
LEFT BULBOUS
SQUARE END
RIGHT BULBOUS
LEFT BULBOUS
SQUARE END
RIGHT BULBOUS
LEFT BULBOUS
SQUARE END
RIGHT BULBOUS
LEFT BULBOUS
Cross Reference | NSN 9540-00-261-5623
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 36542 | 01634 | ALUMINUM CO OF AMERICA |
| QQ-A-200/3 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
| 11352-2 | 27610 | INTERNATIONAL LIGHT METALS CORPSUB OF MARTIN MARIETTA CORP |
| LS3701 | 98897 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS |
| 5807 | 01484 | REYNOLDS METALS CO |
| AMS-QQ-A-200/3 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
Technical Data | NSN 9540-00-261-5623
| Characteristic | Specifications |
|---|---|
| MATERIAL | ALUMINUM ALLOY 2024 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200 TO 3 FED SPEC 1ST MATERIAL RESPONSE |
| FABRICATION METHOD | EXTRUDED |
| HEAT TREATMENT | T-3511 SOLUTION HEAT TREATED |
| LENGTH | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM |
| BASIC SHAPE STYLE | H SHAPE |
| OVERALL WIDTH | 1.500 INCHES NOMINAL |
| LEFT SIDE FLANGE HEIGHT | 1.500 INCHES NOMINAL |
| RIGHT SIDE FLANGE HEIGHT | 1.500 INCHES NOMINAL |
| LEFT SIDE FLANGE THICKNESS | 0.093 INCHES NOMINAL |
| RIGHT SIDE FLANGE THICKNESS | 0.093 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.750 INCHES NOMINAL |
| LEFT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.750 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.750 INCHES NOMINAL |
| RIGHT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.750 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.120 INCHES NOMINAL |
| FILLET RADIUS WHERE BOTTOM LEFT FLANGE JOINS WEB FLANGE/LEG | 0.120 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.120 INCHES NOMINAL |
| FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.120 INCHES NOMINAL |
| WEB FLANGE THICKNESS | 0.093 INCHES NOMINAL |
| LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| LEFT BOTTOM INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| RIGHT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| RIGHT BOTTOM INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| FIRST TIP STYLE | SQUARE END |
| SECOND TIP RELATIONSHIP TO FIRST TIP | IDENTICAL |
| THIRD TIP RELATIONSHIP TO PRECEDING TIPS | NOT IDENTICAL |
| THIRD TIP STYLE | RIGHT BULBOUS |
| THIRD TIP RADIUS | 0.060 INCHES NOMINAL |
| THIRD TIP DIAMETER | 0.240 INCHES NOMINAL |
| FOURTH TIP RELATIONSHIP TO PRECEDING TIPS | NOT IDENTICAL |
| FOURTH TIP STYLE | LEFT BULBOUS |
| FOURTH TIP RADIUS | 0.060 INCHES NOMINAL |
| FOURTH TIP DIAMETER | 0.240 INCHES NOMINAL |
| WEIGHT PER UNIT MEASURE | 0.560 POUNDS PER LINEAR FOOT |
| NONDEFINITIVE SPEC/STD DATA | T-3511 TEMPER |