NSN 5985-00-810-9052
Part Details | VARIABLE ATTENUATOR
5985-00-810-9052 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).
Alternate Parts: C1B8, 5985-00-810-9052, 00-810-9052, 5985008109052, 008109052
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JAN 01, 1962 | 00-810-9052 | 00838 ( ATTENUATOR, VARIABLE ) |
REFERENCE DRAWINGS & PICTURES
CYLINDRICAL W/REAR TERMINALS
UNBALANCED LADDER
Cross Reference | NSN 5985-00-810-9052
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| C1B8 | 12697 | CLAROSTAT SENSORS AND CONTROLS |
Technical Data | NSN 5985-00-810-9052
| Characteristic | Specifications |
|---|---|
| APPLICATION DESIGN | AUDIO |
| SCHEMATIC DIAGRAM DESIGNATOR | UNBALANCED LADDER |
| FREQUENCY RANGE | 0.000 KILOHERTZ MINIMUM AND 20.000 KILOHERTZ MAXIMUM |
| IMPEDANCE RATING IN OHMS | 8.0 INPUT-OUTPUT |
| POWER RATING | 10.0 WATTS AVERAGE |
| OVERALL ATTENUATION RANGE IN DECIBELS | P0.0/P24.0 |
| ATTENUATION VARIATION METHOD | STEPPED |
| STEP POSITION QUANTITY | 10 |
| ATTENUATION PER STEP IN DECIBELS | 3.0 |
| BODY STYLE | CYLINDRICAL W/REAR TERMINALS |
| OVERALL LENGTH | 3.750 INCHES NOMINAL |
| BUSHING LENGTH | 0.375 INCHES NOMINAL |
| BODY LENGTH | 2.375 INCHES NOMINAL |
| OVERALL DIAMETER | 2.000 INCHES NOMINAL |
| ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 SHAFT |
| SHAFT TYPE | ROUND |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| SHAFT LENGTH | 1.375 INCHES NOMINAL |
| TERMINAL TYPE AND QUANTITY | 6 TAB, SOLDER LUG |
| MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED BUSHING |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.250 INCHES |
| MOUNTING THREAD QUANTITY | 20 PER INCH |
| MOUNTING FACILITY PATTERN | SIX POSITION CIRCULAR |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.375 INCHES NOMINAL |
| BOLT CIRCLE DIAMETER | 0.250 INCHES MINIMUM |
| MOUNTING SLOT LENGTH | 4.750 INCHES NOMINAL |