NSN 5977-01-595-2227
Part Details | ELECTRICAL CONTACT BRUSH
5977-01-595-2227 An item specifically designed to be used in the transfer of electrical energy to or from another conducting surface. Either the brush or the surface is continually moving during the transfer of energy. The brush is usually composed in part of some form of the element carbon. Includes: (1) a single brush either with or without an attached shunt (flexible wire lead) and/or a helical or flat type pressure spring; (2) a split brush composed of two or more pieces (wafers), which are used in place of one brush usually connected together by individual shunts to a common terminal; (3) paired brushes composed of two identical or non-identical brushes connected together by a common shunt either with or without pressure springs or connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like either with or without individual shunts; (4) multiple brushes composed of more than two identical or non-identical brushes without pressure springs connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like by individual shunts. Does not include moving contacts which make and slide past stationary contacts, but are stationary while the circuit is conducting, such as the sliding contacts on a rheostat or the stationary contact on a synchro. Excludes: CONTACT, ELECTRICAL; and CONTACT ASSEMBLY, ELECTRICAL.
Alternate Parts: BTM18L, BTM18-L, 5977-01-595-2227, 01-595-2227, 5977015952227, 015952227
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | APR 25, 2011 | 01-595-2227 | 00302 ( BRUSH, ELECTRICAL CONTACT ) |
REFERENCE DRAWINGS & PICTURES
CYLINDRICAL
ONE PIECE
Cross Reference | NSN 5977-01-595-2227
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| BTM18-L | 1HT10 | GENERAL DYNAMICS GLOBAL IMAGINGTECHNOLOGIES, INC. |
Technical Data | NSN 5977-01-595-2227
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | ONE PIECE |
| BODY STYLE | CYLINDRICAL |
| OUTER EDGE TO SLOT EDGE DISTANCE | 0.041 INCHES NOMINAL |
| HOLE DIAMETER | 0.187 INCHES MINIMUM AND 0.188 INCHES MAXIMUM |
| DISTANCE FROM CENTER OF HOLE TO OUTSIDE EDGE | 0.8593 INCHES MINIMUM AND 0.8595 INCHES MAXIMUM |
| SPRING FREE LENGTH | 1.717 INCHES MINIMUM AND 1.719 INCHES MAXIMUM |
| LARGEST OUTSIDE DIAMETER | 0.942 INCHES NOMINAL |
| SPECIAL FEATURES | PEAK TORQUE:20 OZ/IN;POWER AT TP:60WATTS;MOTOR CONSTANT:2.59 OZ/IN;CONSTINUOUS TORQUE:6.0 OZ/IN;POWER AT CONSTINUOUS TORQUE:8.5 WATTS;INPUT VOLTS AT CONSTINUOUS TORQUE:8.5 VOLTS;ELECTRICAL TIME CONSTANT:0.77 MILLI-SECOND;MECHANICAL TIME CONSTANT:25 MILLI-SEC;DAMPING FACTOR:0.048 OZ/IN/RAD/SEC;ROTOR INERTIA:0.0012 OZ/IN/SEC;ANGULAR EXCURSION:+,- 50 DEGREES;TOTAL BREAKAWAY TORQUE:0.60 OZ/IN;MAX ALLOWABLE WDG TEMP:155.0C;NUMBER POLES:2;WEIGHT:5.6 OZ;WINDING CONSTANTS:RESISTANCE:6.5 +,-12.5 PERCENT OHMS;VOLTAGE AT TP:19.7 VOLTS NOMINAL;CURRENT AT TP:3.03 AMPS NOMINAL;TORQUE SENSITIVITY:6.60 OZ/IN/AMP,+,-10 PERCENT;BACK E.M.F. 0.047 VOLTS/RAD/SEC,+,-10 PERCENT;INDUCTANCE:5.0 MILLIHENRIES,+,- 30 PERCENT. |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BTM18-L BRUSHLESS DC MOTORS |