NSN 5955-00-064-3156
Part Details | QUARTZ CRYSTAL UNIT
5955-00-064-3156 An item which consists of a quartz crystal resonator(s), suitably mounted in a HOLDER, QUARTZ CRYSTAL.
Alternate Parts: MILC309885, MIL-C-3098/85, CR109U11M17500, CR109/U11M17500, RD24300117, RD24300-1-17, 5955-00-064-3156, 00-064-3156, 5955000643156, 000643156
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JAN 01, 1963 | 00-064-3156 | 00196 ( CRYSTAL UNIT, QUARTZ ) |
REFERENCE DRAWINGS & PICTURES
OVAL BODY, PIN TERMINALS
Cross Reference | NSN 5955-00-064-3156
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| MIL-C-3098/85 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CR109/U11M17500 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| RD24300-1-17 | 00724 | RAYTHEON COMPANYDBA RAYTHEON |
Technical Data | NSN 5955-00-064-3156
| Characteristic | Specifications |
|---|---|
| MODE OF OSCILLATION | FUNDAMENTAL |
| CIRCUIT RESONANCE | ANTIRESONANCE |
| LOAD CAPACITANCE IN PICOFARADS | 31.5 MINIMUM AND 32.5 MAXIMUM |
| SHUNT CAPACITANCE IN PICOFARADS | 7.0 MAXIMUM |
| SPECIFIED FREQUENCY | 11.175 MEGAHERTZ |
| FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | M0.002/P0.002 |
| OPERATING TEMP RANGE | +80.0 TO +90.0 DEG CELSIUS |
| CONTROLLED REFERENCE TEMP | 85.0 DEG CELSIUS |
| FREQUENCY TOLERANCE AT REFERENCE TEMP IN PERCENT | M0.002/P0.002 |
| FREQUENCY STABILITY IN PERCENT | M0.0005/P0.0005 |
| OPERABLE TEMP RANGE | -55.0 TO +80.0 DEG CELSIUS |
| EQUIVALENT RESISTANCE VALUE IN OHMS | 22.0 MAXIMUM |
| DRIVE LEVEL RATING | 2.0 MILLIWATTS MINIMUM AND 3.0 MILLIWATTS MAXIMUM |
| STYLE DESIGNATOR | OVAL BODY, PIN TERMINALS |
| OVERALL LENGTH | 0.652 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| TERMINAL LENGTH | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| OVERALL WIDTH | 0.410 INCHES MINIMUM AND 0.430 INCHES MAXIMUM |
| BODY LENGTH | 0.435 INCHES MINIMUM AND 0.470 INCHES MAXIMUM |
| BODY WIDTH | 0.395 INCHES MINIMUM AND 0.405 INCHES MAXIMUM |
| BODY THICKNESS | 0.145 INCHES MINIMUM AND 0.155 INCHES MAXIMUM |
| OVERALL THICKNESS | 0.160 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
| TERMINAL DIAMETER | 0.038 INCHES MINIMUM AND 0.042 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.182 INCHES MINIMUM AND 0.202 INCHES MAXIMUM |
| HOLDER COVER MATERIAL | METAL |
| TEST DATA DOCUMENT | 83149-MIL-C-3098 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-3098 TO 85 GOVERNMENT SPECIFICATION |