NSN 5915-01-237-2480
Part Details | RADIO FREQUENCY INTERFERENCE FILTER
5915-01-237-2480 An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
Alternate Parts: 110F0831, 110F083-1, FA601156, FA60-1156, 30957, 5915-01-237-2480, 01-237-2480, 5915012372480, 012372480
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JUL 28, 1986 | 01-237-2480 | 00765 ( FILTER, RADIO FREQUENCY INTERFERENCE ) |
REFERENCE DRAWINGS & PICTURES
RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES
Cross Reference | NSN 5915-01-237-2480
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 110F083-1 | 88379 | AEROFLEX PLAINVIEW, INC. |
| FA60-1156 | 81831 | FILTRON CO INCDIV OF RFI CORP |
| 30957 | 81831 | FILTRON CO INCDIV OF RFI CORP |
Technical Data | NSN 5915-01-237-2480
| Characteristic | Specifications |
|---|---|
| SOURCE IMPEDANCE RATING PER FUNCTION | ZZ50.0 OHMS |
| LOAD IMPEDANCE PER FUNCTION | ZZ50.0 OHMS |
| OPERATING VOLTAGE RATING AND TYPE PER FUNCTION | BZZ115.0 VOLTS |
| POWER LINE FREQUENCY RATING PER FUNCTION IN HERTZ | 60.0 BLANK |
| OPERATING CURRENT RATING PER FUNCTION IN AMPS | 20.0 BLANK |
| INCLOSURE TYPE | HERMETICALLY SEALED |
| STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES |
| OVERALL LENGTH | 6.000 INCHES NOMINAL |
| OVERALL HEIGHT | 2.625 INCHES NOMINAL |
| OVERALL WIDTH | 9.500 INCHES NOMINAL |
| BODY LENGTH | 4.500 INCHES NOMINAL |
| BODY WIDTH | 8.250 INCHES NOMINAL |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.218 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 5.312 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 7.000 INCHES NOMINAL |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| OPERATING TEMP RANGE | -0.0 TO +50.0 DEG CELSIUS |
| BODY MATERIAL | METAL |
| END ITEM IDENTIFICATION | RADAR SET AN/FPS-115 |