NSN 5905-00-150-5635
Part Details | WIRE WOUND FIXED RESISTOR
5905-00-150-5635 A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self supporting. Opposition to the flow of current is an inherent property of the resistance wire and is manifest by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE.
Alternate Parts: RB43CE34800F, MILR937, MIL-R-93/7, 5905-00-150-5635, 00-150-5635, 5905001505635, 001505635
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | MAY 07, 1971 | 00-150-5635 | 00010 ( RESISTOR, FIXED, WIRE WOUND ) |
REFERENCE DRAWINGS & PICTURES
AXIAL TERMINAL EACH END
Cross Reference | NSN 5905-00-150-5635
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| RB43CE34800F | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MIL-R-93/7 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 5905-00-150-5635
| Characteristic | Specifications |
|---|---|
| ELECTRICAL RESISTANCE | 3.480 KILOHMS |
| RESISTANCE TOLERANCE IN PERCENT | M1.000/P1.000 |
| POWER DISSIPATION RATING IN WATTS | 0.400 FREE AIR |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 125.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 145.0 |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | M20.0/P20.0 |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | M65.0/P145.0 |
| INCLOSURE METHOD | ENCAPSULATED |
| STYLE DESIGNATOR | 6 AXIAL TERMINAL EACH END |
| BODY DIAMETER | 0.660 INCHES MINIMUM AND 0.840 INCHES MAXIMUM |
| BODY LENGTH | 0.780 INCHES MINIMUM AND 1.100 INCHES MAXIMUM |
| TERMINAL TYPE | TAB, SOLDER LUG |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TERMINAL LENGTH | 0.326 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| TERMINAL WIDTH | 0.141 INCHES MINIMUM AND 0.235 INCHES MAXIMUM |
| CUBIC MEASURE | 0.610 CUBIC INCHES |
| TEST DATA DOCUMENT | 81349-MIL-R-93 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-R-93 TO 7 GOVERNMENT SPECIFICATION |