NSN 5905-00-138-6922
Part Details | COMPOSITION FIXED RESISTOR
5905-00-138-6922 A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of a mixture of carbon, an insulating material, and suitable binders, either molded together or applied as a thin layer of conducting material on an insulated form. The opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the item itself. See also ATTENUATOR, FIXED; RESISTOR, FIXED, FILM; and RESISTOR, THERMAL. Excludes SUPPRESSOR, IGNITION INTERFERENCE.
Alternate Parts: SMD201606125, SMD2016061-25, SMD201606125, SMD2016061-25, 5905-00-138-6922, 00-138-6922, 5905001386922, 001386922
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | AUG 09, 1971 | 00-138-6922 | 00126 ( RESISTOR, FIXED, COMPOSITION ) |
REFERENCE DRAWINGS & PICTURES
AXIAL TERMINAL EACH END
Cross Reference | NSN 5905-00-138-6922
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| SMD2016061-25 | 15412 | AMTRON DIV OF THE SIPPICAN CORP |
| SMD2016061-25 | 80063 | US ARMY COMMUNICATIONS &ELECTRONICS MATERIEL READINESS |
Technical Data | NSN 5905-00-138-6922
| Characteristic | Specifications |
|---|---|
| ELECTRICAL RESISTANCE | 300.000 OHMS |
| RESISTANCE TOLERANCE IN PERCENT | M5.000/P5.000 |
| POWER DISSIPATION RATING IN WATTS | 0.500 FREE AIR |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 130.0 |
| INCLOSURE METHOD | ENCAPSULATED |
| STYLE DESIGNATOR | 4 AXIAL TERMINAL EACH END |
| BODY DIAMETER | 0.138 INCHES NOMINAL |
| BODY LENGTH | 0.375 INCHES NOMINAL |
| TERMINAL TYPE | WIRE LEAD |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| SPECIAL FEATURES | INSULATED SLEEVING TYPE NO. TFT250-20 INSERTED OVER EACH WIRE LEAD; SOLDERLESS TERMINAL SNAP-IN TYPE PART NO. M21097-16-04 ATTACHED TO EACH WIRE LEAD |
| TEST DATA DOCUMENT | 80063-SMD2016061 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |