NSN 5905-00-134-0426
Part Details | NONPRECISION NONWIRE WOUND VARIABLE RESISTOR
5905-00-134-0426 A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
Alternate Parts: 134FTS1074, 134FTS107-4, 41219714, 412197-14, 220274, 22027-4, 5905-00-134-0426, 00-134-0426, 5905001340426, 001340426
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | AUG 25, 1969 | 00-134-0426 | 37405 ( RESISTOR, VARIABLE, NONWIRE WOUND, NONPRECISION ) |
REFERENCE DRAWINGS & PICTURES
CYLINDRICAL SERVO MOUNTED
ROUND
Cross Reference | NSN 5905-00-134-0426
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 134FTS107-4 | 08815 | HONEYWELL INTERNATIONAL INC.DBA HONEYWELL |
| 412197-14 | 80020 | NAVAL AIR WARFARE CENTER AIRCRAFTDIVISION CODE 4.8.8.0.0.B BLDG 148-2 |
| 22027-4 | 04454 | SENSOR SYSTEMS, L.L.C. |
Technical Data | NSN 5905-00-134-0426
| Characteristic | Specifications |
|---|---|
| SECTION QUANTITY | 2 |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO +5.0 ALL SECTIONS |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -300.0 TO +300.0 ALL SECTIONS |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 55.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 ALL SECTIONS |
| FIXED TAP QUANTITY PER SECTION | 1 1ST SECTION |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 4250.0 1ST SECTION |
| TAP LOCATION TOLERANCE PER SECTION | -1.0 TO +1.0 OHMS 1ST SECTION |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| PILOT DIAMETER | 1.5620 INCHES MAXIMUM |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| UNDERCUT DIAMETER | 1.750 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| BODY DIAMETER | 1.767 INCHES MAXIMUM |
| BODY LENGTH | 0.977 INCHES MAXIMUM |
| MOUNTING LIP DIAMETER | 1.7670 INCHES MAXIMUM |
| MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL |
| ACTUATOR TYPE | SINGLE SHAFT |
| SHAFT STYLE | ROUND |
| SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| SHAFT LENGTH | 0.562 INCHES NOMINAL |
| CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW-CW |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 165.0 MINIMUM AND 175.0 MAXIMUM |
| MOUNTING METHOD | CLAMP RING |
| FEATURES PROVIDED | NONMETALLIC SHAFT |
| TERMINAL TYPE AND QUANTITY | 7 TAB, SOLDER LUG |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TEST DATA DOCUMENT | 80020-41297 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| OVERALL LENGTH | 2.230 INCHES MAXIMUM |
| OVERALL DIAMETER | 2.120 INCHES MAXIMUM |