NSN 5905-00-106-0152
Part Details | WIRE WOUND FIXED RESISTOR
5905-00-106-0152 A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self supporting. Opposition to the flow of current is an inherent property of the resistance wire and is manifest by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE.
Alternate Parts: 63A76A10069, 63A76A1006-9, 5905-00-106-0152, 00-106-0152, 5905001060152, 001060152
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JUL 22, 1968 | 00-106-0152 | 00010 ( RESISTOR, FIXED, WIRE WOUND ) |
REFERENCE DRAWINGS & PICTURES
AXIAL TERMINAL EACH END
Cross Reference | NSN 5905-00-106-0152
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 63A76A1006-9 | 10001 | NAVAIR AND NAVSEA MANAGEDORIGINAL DESIGN ACTIVITY DWG NOT |
Technical Data | NSN 5905-00-106-0152
| Characteristic | Specifications |
|---|---|
| ELECTRICAL RESISTANCE | 1.500 KILOHMS |
| RESISTANCE TOLERANCE IN PERCENT | M1.000/P1.000 |
| POWER DISSIPATION RATING IN WATTS | 6.000 FREE AIR |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | M30.0/P30.0 |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | M55.0/P275.0 |
| INCLOSURE METHOD | ENCASED |
| STYLE DESIGNATOR | 48 AXIAL TERMINAL EACH END |
| BODY LENGTH | 0.750 INCHES NOMINAL |
| BODY WIDTH | 0.420 INCHES NOMINAL |
| BODY HEIGHT | 0.390 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 0.562 INCHES NOMINAL |
| MOUNTING HOLE SIZE | 0.094 INCHES NOMINAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.100 |
| REACTANCE CHARACTERISTIC | INDUCTIVE |
| TERMINAL LENGTH | 0.312 INCHES NOMINAL |
| TEST DATA DOCUMENT | 10001-63A76A1006 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CRITICALITY CODE JUSTIFICATION | TEST |
| HEAT SINK MATERIAL | ALUMINUM ALLOY |
| HEAT SINK LENGTH | 6.000 INCHES |
| HEAT SINK WIDTH | 4.000 INCHES |
| HEAT SINK HEIGHT | 2.000 INCHES |
| HEAT SINK THICKNESS | 0.040 INCHES |