NSN 5905-00-006-7033
Part Details | WIRE WOUND FIXED RESISTOR
5905-00-006-7033 A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self supporting. Opposition to the flow of current is an inherent property of the resistance wire and is manifest by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE.
Alternate Parts: RE60N68R1, MILR185461, MILR18546-1, 5905-00-006-7033, 00-006-7033, 5905000067033, 000067033
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JUN 25, 1972 | 00-006-7033 | 00010 ( RESISTOR, FIXED, WIRE WOUND ) |
REFERENCE DRAWINGS & PICTURES
AXIAL TERMINAL EACH END
Cross Reference | NSN 5905-00-006-7033
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| RE60N68R1 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MILR18546-1 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 5905-00-006-7033
| Characteristic | Specifications |
|---|---|
| ELECTRICAL RESISTANCE | 68.100 OHMS |
| RESISTANCE TOLERANCE IN PERCENT | M1.000/P1.000 |
| POWER DISSIPATION RATING IN WATTS | 5.000 HEAT SINK |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | M50.0/P50.0 |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | M55.0/P275.0 |
| INCLOSURE METHOD | ENCASED |
| STYLE DESIGNATOR | 48 AXIAL TERMINAL EACH END |
| BODY LENGTH | 0.600 INCHES NOMINAL |
| BODY WIDTH | 0.334 INCHES NOMINAL |
| BODY HEIGHT | 0.320 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 0.444 INCHES NOMINAL |
| MOUNTING HOLE SIZE | 0.093 INCHES NOMINAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TERMINAL LENGTH | 0.266 INCHES NOMINAL |
| TERMINAL WIDTH | 0.085 INCHES NOMINAL |
| TEST DATA DOCUMENT | 81349-MIL-R-18546 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-R-18546 TO 1F GOVERNMENT SPECIFICATION |
| HEAT SINK MATERIAL | ALUMINUM ALLOY |
| HEAT SINK LENGTH | 6.000 INCHES |
| HEAT SINK WIDTH | 4.000 INCHES |
| HEAT SINK HEIGHT | 2.000 INCHES |
| HEAT SINK THICKNESS | 0.040 INCHES |