NSN 5340-00-463-8260
Part Details | ANGLE BRACKET
5340-00-463-8260 A ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
Alternate Parts: LS5998P66, LS5998P6-6, 5340-00-463-8260, 00-463-8260, 5340004638260, 004638260
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | MAY 14, 1969 | 00-463-8260 | 16900 ( BRACKET, ANGLE ) |
REFERENCE DRAWINGS & PICTURES
SQUARE AND TAPERED
ONE HOLE
TWO HOLES
SQUARE AND TAPERED
ONE HOLE
TWO HOLES
ANGLE
Cross Reference | NSN 5340-00-463-8260
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| LS5998P6-6 | 98897 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS |
Technical Data | NSN 5340-00-463-8260
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 301 |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 T 301 MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE TREATMENT | CADMIUM AND CHROMATE |
| STYLE DESIGNATOR | ANGLE |
| FIRST LEG LENGTH | 0.625 INCHES MINIMUM AND 0.745 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.625 INCHES MINIMUM AND 0.745 INCHES MAXIMUM |
| FIRST LEG THICKNESS | 0.040 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.040 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG STYLE | SQUARE AND TAPERED |
| FIRST LEG WIDTH | 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| FIRST LEG END WIDTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| SECOND LEG END WIDTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.135 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.150 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| SECOND LEG HOLE DIAMETER | 0.218 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE AND TAPERED |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| HEAT TREATMENT | FULL HARD |