NSN 5340-00-449-3403
Part Details | DOUBLE ANGLE BRACKET
5340-00-449-3403 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
Alternate Parts: 662070, 5340-00-449-3403, 00-449-3403, 5340004493403, 004493403
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | MAY 15, 1970 | 00-449-3403 | 20354 ( BRACKET, DOUBLE ANGLE ) |
REFERENCE DRAWINGS & PICTURES
END RADIUS
ONE HOLE
END RADIUS
ONE HOLE
OFFSET DOUBLE ANGLE
Cross Reference | NSN 5340-00-449-3403
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 662070 | 77445 | UNITED TECHNOLOGIES CORPORATIONDBA PRATT WHITNEY-SPARE PARTS |
Technical Data | NSN 5340-00-449-3403
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 410 |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE51410 FED SPEC SINGLE MATERIAL RESPONSE |
| FABRICATION METHOD | STAMPED |
| SURFACE TREATMENT | CADMIUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE |
| STYLE DESIGNATOR | OFFSET DOUBLE ANGLE |
| SECOND LEG LENGTH | 0.600 INCHES MINIMUM AND 0.860 INCHES MAXIMUM |
| FIRST LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.063 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.063 INCHES MAXIMUM |
| CENTER SECTION WIDTH | 0.500 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.056 INCHES MINIMUM AND 0.063 INCHES MAXIMUM |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG END RADIUS | 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.500 INCHES NOMINAL |
| SECOND LEG END RADIUS | 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| SECOND LEG HOLE DIAMETER | 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| SECOND LEG STYLE | END RADIUS |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FSC APPLICATION DATA | JET ENGINE,ACFT |