NSN 5320-00-959-0252
Part Details | PIN-RIVET
5320-00-959-0252 A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
Alternate Parts: HL5764, HL57-6-4, HL5764, HL57-6-4, HL5764, HL57-6-4, HL5764, HL57-6-4, HL5764, HL57-6-4, HL5764, HL57-6-4, HL5764, HL57-6-4, HL5764, HL57-6-4, HL5764, HL57-6-4, HL5764, HL57-6-4, 5320-00-959-0252, 00-959-0252, 5320009590252, 009590252
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | MAY 18, 1966 | 00-959-0252 | 67165 ( PIN-RIVET ) |
REFERENCE DRAWINGS & PICTURES
FLUSH COUNTERSUNK
PIN-RIVET, STRAIGHT, THREADED
Cross Reference | NSN 5320-00-959-0252
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| HL57-6-4 | C4293 | ALCOA FASTENING SYSTEMSFAIRCHILDFASTENERS EUROPE - VSD GMBH |
| HL57-6-4 | 92215 | ARCONIC GLOBAL FASTENERS & RINGS,INC. |
| HL57-6-4 | 73197 | HI-SHEAR CORPORATION |
| HL57-6-4 | 17446 | HUCK INTERNATIONAL, INC.DBA ARCONIC FASTENING SYSTEMS AND |
| HL57-6-4 | 97928 | HUCK INTL INC |
| HL57-6-4 | 56878 | SPS TECHNOLOGIES, LLCDBA AEROSPACE DIVISION |
| HL57-6-4 | 80539 | SPS TECHNOLOGIES, LLCDBA AEROSPACE FASTENERS GROUP |
| HL57-6-4 | 06725 | SPS TECHNOLOGIES, LLCDBA AIR INDUSTRIES |
| HL57-6-4 | 27624 | SPS TECHNOLOGIES, LLCDBA PB FASTENERS |
| HL57-6-4 | 60516 | WEST COAST AEROSPACE INC |
Technical Data | NSN 5320-00-959-0252
| Characteristic | Specifications |
|---|---|
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| SHEAR STRENGTH | 95000 SINGLE POUNDS PER SQUARE INCH |
| HEAD STYLE | FLUSH COUNTERSUNK |
| HEAD MAJOR DIAMETER | 0.297 INCHES MINIMUM AND 0.302 INCHES MAXIMUM |
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| FASTENER LENGTH | 0.595 INCHES MINIMUM AND 0.615 INCHES MAXIMUM |
| WIDTH BETWEEN FLATS | 0.079 INCHES MINIMUM AND 0.081 INCHES MAXIMUM |
| SHANK DIAMETER | 0.202 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| GRIP LENGTH | 0.255 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNJF |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |