NSN 5320-00-101-5541
Part Details | PIN-RIVET
5320-00-101-5541 A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
Alternate Parts: HL64163, HL641-6-3, 3M249C33, 3M249C3-3, 3M249C33, 3M249C3-3, HL64163, HL641-6-3, HL64163, HL641-6-3, 3M249C33, 3M249C3-3, 3M249C33, 3M249C3-3, 3M249C33, 3M249C3-3, 3M249C33, 3M249C3-3, 3M249C33, 3M249C3-3, 5320-00-101-5541, 00-101-5541, 5320001015541, 001015541
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | DEC 13, 1972 | 00-101-5541 | 67165 ( PIN-RIVET ) |
REFERENCE DRAWINGS & PICTURES
FLUSH COUNTERSUNK
PIN-RIVET, STRAIGHT, THREADED
Cross Reference | NSN 5320-00-101-5541
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| HL641-6-3 | C4293 | ALCOA FASTENING SYSTEMSFAIRCHILDFASTENERS EUROPE - VSD GMBH |
| 3M249C3-3 | 92215 | ARCONIC GLOBAL FASTENERS & RINGS,INC. |
| 3M249C3-3 | 76301 | BOEING COMPANY, THEDBA BOEING |
| HL641-6-3 | 73197 | HI-SHEAR CORPORATION |
| HL641-6-3 | R1120 | SATAIR A/S |
| 3M249C3-3 | 80539 | SPS TECHNOLOGIES, LLCDBA AEROSPACE FASTENERS GROUP |
| 3M249C3-3 | 06725 | SPS TECHNOLOGIES, LLCDBA AIR INDUSTRIES |
| 3M249C3-3 | 0KRT5 | TAB HARDWARE INC |
| 3M249C3-3 | 1V757 | WESCO AIRCRAFT HARDWARE CORP.DBA WESCO AIRCRAFT |
| 3M249C3-3 | 60516 | WEST COAST AEROSPACE INC |
Technical Data | NSN 5320-00-101-5541
| Characteristic | Specifications |
|---|---|
| SHEAR STRENGTH | 95000 SINGLE POUNDS PER SQUARE INCH |
| HEAD STYLE | FLUSH COUNTERSUNK |
| HEAD MAJOR DIAMETER | 0.2966 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM |
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| FASTENER LENGTH | 0.558 INCHES MINIMUM AND 0.578 INCHES MAXIMUM |
| WIDTH BETWEEN FLATS | 0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM |
| SHANK DIAMETER | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| GRIP LENGTH | 0.126 INCHES MINIMUM AND 0.188 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNJF |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |