NSN 5320-00-093-7434
Part Details | PIN-RIVET
5320-00-093-7434 A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
Alternate Parts: HL198PB85, HL198PB-8-5, HL19PB85, HL19PB-8-5, HL19PB85, HL19PB-8-5, HL19PB85, HL19PB-8-5, HL19PB85, HL19PB-8-5, HL19PB85, HL19PB-8-5, 1213AS62485, 1213AS624-8-5, GB510B45, GB510B4-5, HL19PB85, HL19PB-8-5, HL19PB85, HL19PB-8-5, HL19PB85, HL19PB-8-5, BACB30FN85, BACB30FN8-5, HL19PB85, HL19PB-8-5, 5320-00-093-7434, 00-093-7434, 5320000937434, 000937434
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | DEC 03, 1972 | 00-093-7434 | 67165 ( PIN-RIVET ) |
REFERENCE DRAWINGS & PICTURES
FLUSH COUNTERSUNK
PIN-RIVET, STRAIGHT, THREADED
Cross Reference | NSN 5320-00-093-7434
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| HL198PB-8-5 | 92215 | ARCONIC GLOBAL FASTENERS & RINGS,INC. |
| HL19PB-8-5 | 1RC86 | ARCONIC GLOBAL FASTENERS & RINGS,INC. |
| HL19PB-8-5 | 06950 | ARCONIC GLOBAL FASTENERS & RINGS,INC. |
| HL19PB-8-5 | 73197 | HI-SHEAR CORPORATION |
| HL19PB-8-5 | 17446 | HUCK INTERNATIONAL, INC.DBA ARCONIC FASTENING SYSTEMS AND |
| HL19PB-8-5 | L4528 | LISI AEROSPACE CANADA CORPDIV HI SHEAR HOLDINGS INC |
| 1213AS624-8-5 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGEDORIGINAL DESIGN ACTIVITY NOT |
| GB510B4-5 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATIONDIV MISSION SYSTEMS |
| HL19PB-8-5 | 56878 | SPS TECHNOLOGIES, LLCDBA AEROSPACE DIVISION |
| HL19PB-8-5 | 80539 | SPS TECHNOLOGIES, LLCDBA AEROSPACE FASTENERS GROUP |
| HL19PB-8-5 | 06725 | SPS TECHNOLOGIES, LLCDBA AIR INDUSTRIES |
| BACB30FN8-5 | 81205 | THE BOEING COMPANYDBA BOEING |
| HL19PB-8-5 | 60516 | WEST COAST AEROSPACE INC |
Technical Data | NSN 5320-00-093-7434
| Characteristic | Specifications |
|---|---|
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| SHEAR STRENGTH | 95000 SINGLE POUNDS PER SQUARE INCH |
| HEAD STYLE | FLUSH COUNTERSUNK |
| HEAD MAJOR DIAMETER | 0.349 INCHES MAXIMUM |
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| FASTENER LENGTH | 0.697 INCHES MINIMUM AND 0.717 INCHES MAXIMUM |
| WIDTH BETWEEN FLATS | 0.095 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
| SHANK DIAMETER | 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| GRIP LENGTH | 0.317 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNJF |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| THREAD CLASS | 3A |
| THREAD QUANTITY PER INCH | 28 |
| THREAD DIRECTION | RIGHT-HAND |
| LUBRICATION | CETYL ALCOHOL |