NSN 5305-00-130-7645
Part Details | CLOSE TOLERANCE SCREW
5305-00-130-7645 A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Alternate Parts: VT1039H619, VT1039H6-19, HR101H619, HR101H6-19, HR101H619, HR101H6-19, C387H619, C387H6-19, 64040H619, 64040H6-19, 64040H619, 64040H6-19, AIC1023H619, AIC1023H6-19, CS318642H619, CS318642H6-19, 5305-00-130-7645, 00-130-7645, 5305001307645, 001307645
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | DEC 20, 1968 | 00-130-7645 | 29294 ( SCREW, CLOSE TOLERANCE ) |
REFERENCE DRAWINGS & PICTURES
HEXAGON COUNTERSUNK
OFFSET CRUCIFORM (TORQUE SET)
Cross Reference | NSN 5305-00-130-7645
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| VT1039H6-19 | 92215 | ARCONIC GLOBAL FASTENERS & RINGS,INC. |
| HR101H6-19 | 73197 | HI-SHEAR CORPORATION |
| HR101H6-19 | L4528 | LISI AEROSPACE CANADA CORPDIV HI SHEAR HOLDINGS INC |
| C387H6-19 | 81755 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS |
| 64040H6-19 | 56878 | SPS TECHNOLOGIES, LLCDBA AEROSPACE DIVISION |
| 64040H6-19 | 80539 | SPS TECHNOLOGIES, LLCDBA AEROSPACE FASTENERS GROUP |
| AIC1023H6-19 | 06725 | SPS TECHNOLOGIES, LLCDBA AIR INDUSTRIES |
| CS318642H6-19 | 93907 | TEXTRON FASTENING SYSTEMSDBA DECORAH OPERATIONS TFS |
Technical Data | NSN 5305-00-130-7645
| Characteristic | Specifications |
|---|---|
| THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD DIAMETER | 0.375 INCHES |
| THREAD QUANTITY PER INCH | 24 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.469 INCHES MINIMUM AND 0.519 INCHES MAXIMUM |
| FASTENER LENGTH | 1.667 INCHES MINIMUM AND 1.697 INCHES MAXIMUM |
| MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| HEAD STYLE | 0 HEXAGON COUNTERSUNK |
| HEAD DIAMETER | 0.645 INCHES MINIMUM AND 0.672 INCHES MAXIMUM |
| COUNTERSINK ANGLE | 59.75 DEGREES MINIMUM AND 60.25 DEGREES MAXIMUM |
| INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| GRIP LENGTH | 1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM |
| GRIP DIAMETER | 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| SPECIAL FEATURES | BEARING SURFACE OF HEAD TO BE GROOVED TO A 0.472 IN. MIN.,0.474 IN. MAX. DIA,0.115 IN. MIN. 0.120 IN. MAX. FROM TOP OF HEAD |