NSN 3416-01-264-2697
Part Details | ENGINE LATHE
3416-01-264-2697
Alternate Parts: 341621116040, 3416-2111-6040, MILL23249, MIL-L-23249, 1640, 3416-01-264-2697, 01-264-2697, 3416012642697, 012642697
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 34 | SEP 27, 1987 | 01-264-2697 | 03137 ( LATHE, ENGINE ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3416-01-264-2697
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3416-2111-6040 | 99998 | DEFENSE SUPPLY CENTER RICHMONDINDUSTRIAL PLANT EQUIPMENT /DLA/ |
| MIL-L-23249 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| 1640 | 0B6Z5 | OMATECH SERVICE LTD |
Technical Data | NSN 3416-01-264-2697
| Characteristic | Specifications |
|---|---|
| MOUNTING TYPE | FLOOR |
| DESIGN TYPE | SCREW |
| THREAD CHANGE QUANTITY | 93 |
| THREAD QUANTITY RANGE | +2.0 TO +72.0 PER INCH |
| PERFORMANCE TYPE | STANDARD DUTY |
| PURPOSE FOR WHICH DESIGNED | TOOLROOM |
| BED TYPE | SOLID |
| RATED SWING | 16.000 INCHES NOMINAL |
| ACTUAL SWING OVER BED | 16.000 INCHES NOMINAL |
| SWING OVER CROSS SLIDE | 10.000 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE | 40.000 INCHES NOMINAL |
| HEADSTOCK DRIVE TYPE | DIRECT PULLEY, BACK GEARED |
| HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 4 MORSE |
| SPINDLE SPEED QUANTITY | 18 |
| SPINDLE SPEED RANGE IN RPM | P40.0/P2000.0 |
| CARRIAGE QUANTITY | 1 |
| CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| GEAR CHANGE TYPE | QUICK |
| ELECTRIC MOTOR QUANTITY | 1 |
| ELECTRIC MOTOR HORSEPOWER RATING | 10.000 |
| CURRENT TYPE | AC |
| VOLTAGE IN VOLTS | B220.0$$B440.0 |
| FREQUENCY IN HERTZ | 60.0 |
| PHASE | THREE |
| ACCESSORY COMPONENTS AND QUANTITY | 1 FULL LENGTH REAR SPLASH GUARD; 1 10.0 IN. DIA. DOGPLATE; 1 NO. 2 STANDARD TOOLPOST; 2 NO. 4 MORSE TAPER DEAD CENTERS; 1 NO. 4 MORSE TAPER SPIONDLE SLEEVE; 1 OPERATORS HANDBOOK; 1 INSPECTION REPORT; STANDARD 115 VOLT ELECTRIC CONTROLS AND CONTROL PANEL; WRENCHES,KEYS,SPARE PINS |
| SPECIAL FEATURES | D1-6 IN. CAMLOCK 3 BEARING SPINDLE; SWITCHABLE INCH-METRIC FEED BOX; LEADSCREW REVERSE-STANDARD; METRIC THREADING WITHOUT SPINDLE REVERSE |