NSN 3416-01-245-8383
Part Details | ENGINE LATHE
3416-01-245-8383
Alternate Parts: 341621115054, 3416-2111-5054, 12C747, 12C-747, 1502, 15-02, MILL23249, MIL-L-23249, 3416-01-245-8383, 01-245-8383, 3416012458383, 012458383
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 34 | DEC 04, 1986 | 01-245-8383 | 03137 ( LATHE, ENGINE ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3416-01-245-8383
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3416-2111-5054 | 99998 | DEFENSE SUPPLY CENTER RICHMONDINDUSTRIAL PLANT EQUIPMENT /DLA/ |
| 12C-747 | 35377 | MAKINO INC |
| 15-02 | 35377 | MAKINO INC |
| MIL-L-23249 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 3416-01-245-8383
| Characteristic | Specifications |
|---|---|
| MOUNTING TYPE | FLOOR |
| DESIGN TYPE | SCREW |
| THREAD CHANGE QUANTITY | 48 |
| THREAD QUANTITY RANGE | +2.0 TO +112.0 PER INCH |
| PERFORMANCE TYPE | STANDARD DUTY |
| PURPOSE FOR WHICH DESIGNED | TOOLROOM |
| BED TYPE | SOLID |
| RATED SWING | 15.500 INCHES NOMINAL |
| SWING OVER CROSS SLIDE | 9.500 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE | 30.000 INCHES NOMINAL |
| HEADSTOCK DRIVE TYPE | R$T |
| HEADSTOCK CENTER TAPER SIZE DESIGNATOR | J250$JAB4 |
| HOLE DIAMETER THROUGH SPINDLE | 4.125 INCHES NOMINAL |
| SPINDLE SPEED QUANTITY | 12 |
| SPINDLE SPEED RANGE IN RPM | P45.0/P1800.0 |
| CARRIAGE QUANTITY | 1 |
| CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| CARRIAGE FEED CHANGE QUANTITY | 48 |
| GEAR CHANGE TYPE | QUICK |
| ELECTRIC MOTOR QUANTITY | 2 |
| ELECTRIC MOTOR HORSEPOWER RATING | 7.500 |
| CURRENT TYPE | AC |
| VOLTAGE IN VOLTS | B110.0$$B220.0 |
| FREQUENCY IN HERTZ | 60.0 |
| PHASE | SINGLE/THREE |
| SPECIAL FEATURES | 0.250 HORSEPOWER COOLANT MOTOR; CHIP AND COOLANT SHIELD; CHIP PAN; SET OF LEVELING PLATES; TANG DRIVER IN TAILSTOCK SPINDLE; SERVO-SHIFT HEADSTOCK; ELECTRIC BRAKE AND POWER UNIT; TAPERED SPINDLE SLEEVE CENTERS; HARDENED AND GROUND, REPLACEABLE STEEL BEDWAYS; DUAL INCH/METRIC DIALS FOR CROSSFEED; DUAL GRADUATED INCH/METRIC DIAL FOR COMPOUND; CHASING DIAL |