NSN 3416-00-826-3890
Part Details | ENGINE LATHE
3416-00-826-3890
Alternate Parts: XL56, 341612051033, 3416-1205-1033, 00L125, 3416-00-826-3890, 00-826-3890, 3416008263890, 008263890
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 34 | JAN 01, 1962 | 00-826-3890 | 03137 ( LATHE, ENGINE ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3416-00-826-3890
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| XL56 | 54522 | ACME-CLEVELAND CORPNATIONAL ACME CO |
| 3416-1205-1033 | 99998 | DEFENSE SUPPLY CENTER RICHMONDINDUSTRIAL PLANT EQUIPMENT /DLA/ |
| 00L125 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
Technical Data | NSN 3416-00-826-3890
| Characteristic | Specifications |
|---|---|
| MOUNTING TYPE | BENCH |
| DESIGN TYPE | SCREW |
| THREAD CHANGE QUANTITY | 48 |
| THREAD QUANTITY RANGE | +4.000 TO +80.000 PER INCH |
| PERFORMANCE TYPE | STANDARD DUTY |
| PURPOSE FOR WHICH DESIGNED | GENERAL |
| BED TYPE | SOLID |
| RATED SWING | 10.000 INCHES NOMINAL |
| ACTUAL SWING OVER BED | 10.000 INCHES MINIMUM |
| SWING OVER CROSS SLIDE | 5.750 INCHES MINIMUM |
| CENTER TO CENTER DISTANCE | 33.000 INCHES NOMINAL |
| HEADSTOCK DRIVE TYPE | DIRECT PULLEY, BACK GEARED |
| HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 2 ASA STANDARD |
| HOLE DIAMETER THROUGH SPINDLE | 1.375 INCHES NOMINAL |
| SPINDLE SPEED QUANTITY | 8 |
| CARRIAGE QUANTITY | 1 |
| CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| GEAR CHANGE TYPE | QUICK |
| ELECTRIC MOTOR QUANTITY | 1 |
| ELECTRIC MOTOR HORSEPOWER RATING | 0.75 |
| CURRENT TYPE | AC |
| VOLTAGE IN VOLTS | 220.0 |
| FREQUENCY IN HERTZ | 60.0 |
| PHASE | THREE |
| ACCESSORY COMPONENTS AND QUANTITY | 1 CHUCK,COLLET,SPINDLE NOSE,1/16TO1-3/8 IN.;1 CHUCK,DRILL,3 JAW,1/16TO1/2 IN.NO2 MORSE TAPER SHANK;1 CHUCK,LATHE,3 JAW,UNIV.,6 IN.;1 CHUCK,LATHE,4 JAW,IND.,6 IN.;1 COLLET SET,MULTIPLE JAW,MOLDED RUBBER C/O COLLET 1/16TO1/8 IN.;1 EA COLLET 1/8TO1/4,1/4TO3/8,3/8TO1/2,1/2TO5/8,5/8TO3/4,3/4TO7/8,7/8TO1 IN.;1 EA DOG,TAIL BENT,1/2,3/4,1,1-1/4,1-1/2;1 DOG,CLAMP,1-3/4 IN.;1 EA FACEPLATE,LATHE,6,8-1/2 IN.;1 GEAR SET,METRIC TRANSPOSING,ENGLISH GRAD.C/O GEAR,26,28,32,36,40,48 TEETH;1 GEAR ASSY.,COMPOUND METRIC W/110 AND 127 TEETH;1 HOLDER,LATHE TOOL,BORING BAR;1 HOLDER,LATHE TOOL,CUTTING OFF,LH,RH OFFSET AND STRAIGHT;1 EA HOLDER,LATHE,TURNING TOOL,LH,RH OFFSET AND STRAIGHT;1 KNURLING TOOL,W/3 PR KNURLS;1 EA,PLUG,COLLET,RUBBER,1/8TO3/8,1/2TO5/8,3/4TO7/8,1TO1-1/8 IN.;1 EA,REST,FOLLOWR,STEADY |
| SPECIAL FEATURES | 1 STOP,CARRIAGE,MICROMETER;1 TAPER ATTACHMENT,TELESCOPIC |
| NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND 3 CLASS |