NSN 3416-00-725-3508
Part Details | ENGINE LATHE
3416-00-725-3508
Alternate Parts: 341624136050, 3416-2413-6050, MILL13896, 3416-00-725-3508, 00-725-3508, 3416007253508, 007253508
Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
---|---|---|---|
34 | JAN 01, 1963 | 00-725-3508 | 03137 ( LATHE, ENGINE ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3416-00-725-3508
Part Number | Cage Code | Manufacturer |
---|---|---|
3416-2413-6050 | 99998 | DEFENSE SUPPLY CENTER RICHMONDINDUSTRIAL PLANT EQUIPMENT /DLA/ |
MILL13896 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 3416-00-725-3508
Characteristic | Specifications |
---|---|
MOUNTING TYPE | FLOOR |
DESIGN TYPE | SCREW |
THREAD CHANGE QUANTITY | 48 |
THREAD QUANTITY RANGE | +2.0 TO +80.0 PER INCH |
PERFORMANCE TYPE | LIGHT DUTY |
PURPOSE FOR WHICH DESIGNED | GENERAL |
BED TYPE | SLIDING GAP |
SWING OVER CROSS SLIDE | 12.000 INCHES NOMINAL |
RATED SWING THROUGH OPEN GAP | 36.000 INCHES NOMINAL |
ACTUAL SWING THROUGH OPEN GAP | 36.000 INCHES NOMINAL |
RATED SWING OVER CLOSED GAP | 19.000 INCHES NOMINAL |
ACTUAL SWING OVER CLOSED GAP | 19.000 INCHES NOMINAL |
DISTANCE BETWEEN OPEN CENTERS | 50.000 INCHES NOMINAL |
DISTANCE BETWEEN CLOSED CENTERS | 30.000 INCHES NOMINAL |
HEADSTOCK DRIVE TYPE | GEARED HEAD |
HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 4 ASA STANDARD |
HOLE DIAMETER THROUGH SPINDLE | 1.750 INCHES NOMINAL |
SPINDLE SPEED QUANTITY | 12 |
SPINDLE SPEED RANGE IN RPM | P25.0/P1000.0 |
CARRIAGE QUANTITY | 1 |
CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
CARRIAGE FEED CHANGE QUANTITY | 48 |
GEAR CHANGE TYPE | QUICK |
ELECTRIC MOTOR QUANTITY | 1 |
ELECTRIC MOTOR HORSEPOWER RATING | 7.500 |
CURRENT TYPE | AC |
VOLTAGE IN VOLTS | B220.0$$B440.0 |
FREQUENCY IN HERTZ | 60.0 |
PHASE | THREE |
ACCESSORY COMPONENTS AND QUANTITY | PER MIL-STD 931 |
NONDEFINITIVE SPEC/STD DATA | I TYPE AND 1912 TO 36 SIZE |
DEPARTURE FROM CITED DOCUMENT | AKYD |