NSN 3405-01-074-6108
Part Details | METAL CUTTING BAND SAW
3405-01-074-6108 A vairable speed saw, basically designed to cut and/or file metal, using a band saw blade and/or a band file that is revolved or rotated around a driver and idler wheel(s). The teeth form a vertical line while passing through the work. It is equipped with a fixed or tilting horizontal table for mounting the work. The work table and/or saw frame may be capable of tilting as a unit to permit angle cutting. It may be provided with sufficient cutting speeds to allow for wood and/or other material cutting. Excludes SAW (3), BAND, CUTOFF.
Alternate Parts: 340522512013, 3405-2251-2013, 201320, 2013-20, 201310, 2013-10, AA59336, A-A-59336, MILS80201SZ20, MIL-S-80201SZ20, 3405-01-074-6108, 01-074-6108, 3405010746108, 010746108
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 34 | APR 04, 1979 | 01-074-6108 | 17908 ( SAW, BAND, METAL CUTTING ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3405-01-074-6108
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3405-2251-2013 | 99998 | DEFENSE SUPPLY CENTER RICHMONDINDUSTRIAL PLANT EQUIPMENT /DLA/ |
| 2013-20 | 18056 | DOALL BALTIMORE COMPANY |
| 2013-10 | 18056 | DOALL BALTIMORE COMPANY |
| A-A-59336 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTIONPROMULGATED BY GENERAL SERVICES |
| MIL-S-80201SZ20 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 3405-01-074-6108
| Characteristic | Specifications |
|---|---|
| DRIVE METHOD | ELECTRIC MOTOR |
| HORSEPOWER RATING | 3.000 |
| CURRENT TYPE | AC |
| VOLTAGE RATING | A230.0$A460.0 |
| FREQUENCY RATING | 60.0 HERTZ NOMINAL |
| PHASE | THREE |
| ELECTRIC MOTOR QUANTITY | 1 |
| ROTATIONAL SPEED RATING IN RPM | 4000.0 |
| MOUNTING TYPE | FLOOR |
| TABLE LENGTH | 36.000 INCHES NOMINAL |
| TABLE WIDTH | 32.000 INCHES NOMINAL |
| TABLE TYPE | TILTING |
| TABLE RIGHT TILT ANGLE IN DEG | 45.0 |
| TABLE LEFT TILT ANGLE IN DEG | 10.0 |
| BAND TYPE FOR WHICH DESIGNED | SAW BLADE |
| BLADE MAXIMUM LENGTH ACCOMMODATED | 154.000 INCHES |
| BLADE MAXIMUM WIDTH ACCOMMODATED | 1.062 INCHES |
| FRAME TYPE | RIGID |
| VISE | NOT PROVIDED |
| THROAT DEPTH | 20.000 INCHES NOMINAL |
| DISTANCE BETWEEN GUIDE AND TABLE | 13.000 INCHES NOMINAL |
| CUTTING SPEED RANGE | +850.0 TO +5200.0 FEET PER MINUTE |
| INFINITE CUTTING SPEED FEATURE | PROVIDED |
| POWER FEED FEATURE | NOT PROVIDED |
| BRAKING FACILITY | NOT INCLUDED |
| BUILT-IN COOLANT SYSTEM | NOT INCLUDED |
| INTEGRAL BUTT WELDER | INCLUDED |
| INTEGRAL GRINDER | INCLUDED |
| SPECIAL FEATURES | INCLUDED ARE AIR PUMP,CHIP BLOWER,CHIP PAN AND BLADE SHEAR;CAPACITIES AT 0 DEG 21 IN. BY 14 IN.,AT 45 DEG 14 IN. BY 14 IN.;90 IN. HT BY 55 IN. WD;HYDRAULIC POWER UNIT |