NSN 3405-00-409-0063
Part Details | METAL CUTTING BAND SAW
3405-00-409-0063 A vairable speed saw, basically designed to cut and/or file metal, using a band saw blade and/or a band file that is revolved or rotated around a driver and idler wheel(s). The teeth form a vertical line while passing through the work. It is equipped with a fixed or tilting horizontal table for mounting the work. The work table and/or saw frame may be capable of tilting as a unit to permit angle cutting. It may be provided with sufficient cutting speeds to allow for wood and/or other material cutting. Excludes SAW (3), BAND, CUTOFF.
Alternate Parts: 28390, 28-390, 143 W2398487, 143 W/2398487, 3405-00-409-0063, 00-409-0063, 3405004090063, 004090063
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 34 | JAN 22, 1972 | 00-409-0063 | 17908 ( SAW, BAND, METAL CUTTING ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3405-00-409-0063
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 28-390 | 83738 | DELTA INTL MACHINERY CORP |
| 143 W/2398487 | 94389 | HOUDAILLE INDUSTRIES INCPOWERMATIC DIV |
Technical Data | NSN 3405-00-409-0063
| Characteristic | Specifications |
|---|---|
| DRIVE METHOD | ELECTRIC MOTOR |
| HORSEPOWER RATING | 0.750 |
| CURRENT TYPE | AC |
| VOLTAGE RATING | 115.0 VOLTS NOMINAL |
| FREQUENCY RATING | 60.0 HERTZ NOMINAL |
| PHASE | SINGLE |
| ELECTRIC MOTOR QUANTITY | 1 |
| ROTATIONAL SPEED RATING IN RPM | 1725.0 |
| MOUNTING TYPE | FLOOR |
| TABLE LENGTH | 14.000 INCHES NOMINAL |
| TABLE WIDTH | 14.000 INCHES NOMINAL |
| TABLE TYPE | TILTING |
| TABLE RIGHT TILT ANGLE IN DEG | 45.0 |
| TABLE LEFT TILT ANGLE IN DEG | 10.0 |
| BAND TYPE FOR WHICH DESIGNED | SAW BLADE |
| BLADE MAXIMUM LENGTH ACCOMMODATED | 94.000 INCHES |
| BLADE MAXIMUM WIDTH ACCOMMODATED | 0.750 INCHES |
| FRAME TYPE | RIGID |
| VISE | NOT PROVIDED |
| THROAT DEPTH | 13.750 INCHES NOMINAL |
| DISTANCE BETWEEN GUIDE AND TABLE | 6.250 INCHES NOMINAL |
| CUTTING SPEED RANGE | +40.0 TO +3000.0 FEET PER MINUTE |
| CUTTING SPEED QUANTITY | 8 |
| POWER FEED FEATURE | NOT PROVIDED |
| BRAKING FACILITY | NOT INCLUDED |
| BUILT-IN COOLANT SYSTEM | NOT INCLUDED |
| INTEGRAL BUTT WELDER | NOT INCLUDED |
| INTEGRAL GRINDER | NOT INCLUDED |
| ACCESSORY COMPONENTS AND QUANTITY | FENCE,RIP,18 IN.,1;BELT ATTACHMENT,SANDING ABRASIVE,1;WELDER AND GRINDER,BUTT,1;LAMP ATTACHMENT,1;SLIDING,STRAIGHT AND ANGLE CUT-OFF,1;LAMP ATTACHMENT,SLIDING JIG,1;SPARE DRIVE BELT SET,1;BLADE,SKIP TOOTH,100 FT.COIL,ALUMINUM AND PLASTIC CUTTING,1;RAKER SET,FLEXIBLE BACK,CONVENTIONAL TOOTH,1/2 IN.WIDE,14 TOOTH,100 FT.COIL,1;BLADE,1/2 IN.WIDE,24 TOOTH,PIPE AND CHANNEL CUTTING,100 FT.COIL,1;BELT,SANDING,COARSE GRIT,3;BELT,SANDING,MEDIUM GRIT,3 |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY THE DRIVE METHOD,ELECTRIC MOTOR REQUIREMENTS AND ACCESSORY COMPONENTS REQUIREMENT |