NSN 3130-01-251-1010
Part Details | BALL BEARING UNIT
3130-01-251-1010 An assembled unit, composed of a housing incorporating a single or multiple row ball bearing(s), designed to meet various or specific conditions of mounting.
Alternate Parts: RCJC 1 12, RCJC 1 1/2, 3130-01-251-1010, 01-251-1010, 3130012511010, 012511010
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 31 | MAR 12, 1987 | 01-251-1010 | 30556 ( BEARING UNIT, BALL ) |
REFERENCE DRAWINGS & PICTURES
FLANGE BLOCK
Cross Reference | NSN 3130-01-251-1010
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| RCJC 1 1/2 | 21335 | TIMKEN COMPANY, THEDIV TIMKEN AEROSPACE |
Technical Data | NSN 3130-01-251-1010
| Characteristic | Specifications |
|---|---|
| BORE DIAMETER | 1.5000 INCHES MINIMUM AND 1.5005 INCHES MAXIMUM |
| STYLE DESIGNATOR | FLANGE BLOCK |
| FLANGE THICKNESS | 0.688 INCHES NOMINAL |
| HOUSING LENGTH | 1.594 INCHES NOMINAL |
| HOUSING WIDTH | 5.125 INCHES NOMINAL |
| ASSEMBLY OVERALL LENGTH | 2.016 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG SIDE OF A SQUARE | 4.000 INCHES NOMINAL |
| MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| MOUNTING HOLE DIAMETER | 0.516 INCHES NOMINAL |
| LUBRICATION MATERIAL | GREASE |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION FITTING TYPE | PIPE PLUG |
| LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 0.0 DEGREES NOMINAL |
| INTERNAL FIT-UP DESIGNATION | STANDARD |
| ROLLING ELEMENT GROOVE QUANTITY | 1 |
| ALIGNMENT TYPE | SELF-ALIGNING |
| BLOCK TYPE | FIXED |
| SHAFT END TYPE | OPEN |
| SEAL TYPE | CONTACT |
| SEAL LOCATION | BOTH ENDS |
| ROTATING ELEMENT LOCKING METHOD | SETSCREW LOCKING COLLAR |
| COLLAR LOCATION | ONE END |
| LOAD CAPABILITY TYPE | RADIAL |
| FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| SUPPLEMENTARY FEATURES | POWER TRANSMISSION APPL; FLANGE CARTRIDGE CONCENTRIC COLLAR INSERT RELUBRICABLE DESIGN |