NSN 3110-00-063-9706
Part Details | ROD END BALL BEARING
3110-00-063-9706 A special single or multiple-row ball bearing, rigid or self-aligning, and constructed with either a solid or hollow shank, internally or externally threaded.
Alternate Parts: C31163F5, C3116-3F5, RAP3F52E9107A, RAP3F5-2E9107A, RAP3F52E9107, 3110-00-063-9706, 00-063-9706, 3110000639706, 000639706
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 31 | JUN 27, 1967 | 00-063-9706 | 00049 ( BEARING, BALL, ROD END ) |
REFERENCE DRAWINGS & PICTURES
INTERNALLY THREADED W/HEXAGON END
DOUBLE ROW, STAGGERED, BALL
Cross Reference | NSN 3110-00-063-9706
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| C3116-3F5 | 81755 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS |
| RAP3F5-2E9107A | 21335 | TIMKEN COMPANY, THEDIV TIMKEN AEROSPACE |
| RAP3F52E9107 | 21335 | TIMKEN COMPANY, THEDIV TIMKEN AEROSPACE |
Technical Data | NSN 3110-00-063-9706
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | DOUBLE ROW, STAGGERED, BALL |
| SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| OVERALL LENGTH | 1.7650 INCHES NOMINAL |
| BORE DIAMETER | 0.1900 INCHES NOMINAL |
| OUTER RING WIDTH | 0.3280 INCHES NOMINAL |
| INNER RING WIDTH | 0.4370 INCHES NOMINAL |
| LENGTH FROM BORE CENTER TO SHANK END | 1.3750 INCHES NOMINAL |
| SHANK STYLE | INTERNALLY THREADED W/HEXAGON END |
| SHANK DIAMETER | 0.4370 INCHES NOMINAL |
| WIDTH ACROSS FLATS | 0.4370 INCHES NOMINAL |
| SHANK THREAD LENGTH | 0.8125 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD SIZE | 0.312 INCHES |
| THREAD QUANTITY PER INCH | 24 |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| LUBRICATION MATERIAL | GREASE |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| SEAL QUANTITY | 2 |
| BEARING SEAL TYPE | CONTACT |
| ALIGNMENT TYPE | SELF-ALIGNING |
| SPECIAL FEATURES | PRELUBRICATED WITH 40 TO 50 PERCENT OF SPECIFIED GREASE; MAX NO. LOAD STARTING TORQUE 0.6400 OZ; BEARING SHALL CONFORM TO GENERAL DYNAMICS F. W. SPEC C 3116; DRILL HOLE NO. 50 DRILL; THRU SHANK PARALLEL WITH BORE 0.3125 IN. FROM SHANK END; MILL SLOT IN SHANK END PARALLEL WITH BORE 0.0610 IN. DEEP BY 0.0700 IN. WIDE AND 0.0004 IN. RADIAL CLEARANCE |