NSN 3110-00-038-8003
Part Details | ROD END BALL BEARING
3110-00-038-8003 A special single or multiple-row ball bearing, rigid or self-aligning, and constructed with either a solid or hollow shank, internally or externally threaded.
Alternate Parts: 32696513, 32-69651-3, 3110-00-038-8003, 00-038-8003, 3110000388003, 000388003
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 31 | NOV 10, 1972 | 00-038-8003 | 00049 ( BEARING, BALL, ROD END ) |
REFERENCE DRAWINGS & PICTURES
EXTERNALLY THREADED
DOUBLE ROW, STAGGERED, BALL
Cross Reference | NSN 3110-00-038-8003
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 32-69651-3 | 76301 | BOEING COMPANY, THEDBA BOEING |
Technical Data | NSN 3110-00-038-8003
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | DOUBLE ROW, STAGGERED, BALL |
| SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| OVERALL LENGTH | 2.3290 INCHES MINIMUM AND 2.3590 INCHES MAXIMUM |
| BORE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 0.9280 INCHES MINIMUM AND 0.9480 INCHES MAXIMUM |
| OUTER RING WIDTH | 0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM |
| INNER RING WIDTH | 0.5880 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM |
| LENGTH FROM BORE CENTER TO SHANK END | 1.8650 INCHES MINIMUM AND 1.8850 INCHES MAXIMUM |
| SHANK STYLE | EXTERNALLY THREADED |
| SHANK DIAMETER | 0.3750 INCHES NOMINAL |
| SHANK THREAD LENGTH | 1.1250 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD SIZE | 0.375 INCHES |
| THREAD QUANTITY PER INCH | 24 |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| LUBRICATION MATERIAL | GREASE |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| SEAL QUANTITY | 2 |
| BEARING SEAL TYPE | CONTACT |
| ALIGNMENT TYPE | SELF-ALIGNING |
| SELF-ALIGNMENT LOCATION | INTERNAL |
| SPECIAL FEATURES | ONE SLOT IN LG OF THD,0.093 IN. MIN,0.098 IN. MAX,0.306 IN. MIN,0.311 IN. MAX,FROM BOTTOM OF THD |
| TEST DATA DOCUMENT | 76301-MC P.S. 21201 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |