NSN 3040-00-491-0296
Part Details | STRAIGHT SHAFT
3040-00-491-0296 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
Alternate Parts: CPR100300, 3040-00-491-0296, 00-491-0296, 3040004910296, 004910296
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | SEP 26, 1969 | 00-491-0296 | 22109 ( SHAFT, STRAIGHT ) |
REFERENCE DRAWINGS & PICTURES
INTERNAL THREADED
INTERNAL THREADED
Cross Reference | NSN 3040-00-491-0296
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| CPR100300 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-00-491-0296
| Characteristic | Specifications |
|---|---|
| MATERIAL | 0$DST8720 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE |
| FIRST END STYLE | INTERNAL THREADED |
| FIRST END DIAMETER | 2.2479 INCHES MINIMUM AND 2.2486 INCHES MAXIMUM |
| FIRST END INTERNAL THREAD LENGTH | 0.190 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| END SIMILARITY | IDENTICAL |
| OVERALL LENGTH | 8.250 INCHES NOMINAL |
| SPECIAL FEATURES | GROOVE IS INCLUDED,0.190 IN. FROM THE SECOND END,0.160 IN.WIDE; 4 HOLES,0.190 IN.DIAMETER;2 CENTERED LONGITUDINAL HOLES;FIRST END,3.060 IN.IN LENGTH,SECOND END,3.190 IN.IN LENGTH;2 CROSS DRILLED HOLES,1.440 IN.DEEP;FIRST HOLE,2.72 IN.FROM FIRST ENDSECOND HOLE,2.860 IN.FROM SECOND END; CROSS DRILLED HOLES INTERSECT LONGITUDINAL HOLES |