NSN 3040-00-463-0908
Part Details | SHOULDERED SHAFT
3040-00-463-0908 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: C5P27017, C5P27017, 3040-00-463-0908, 00-463-0908, 3040004630908, 004630908
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAY 09, 1969 | 00-463-0908 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
SPLINED (STRAIGHT)
PLAIN
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-00-463-0908
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| C5P27017 | 78567 | SPECO CORP |
| C5P27017 | 5H860 | THOMAS INSTRUMENT, INCORPORATEDDBA THOMAS INSTRUMENT |
Technical Data | NSN 3040-00-463-0908
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | SPLINED (STRAIGHT) |
| MATERIAL | STEEL CORROSION RESISTING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS5643, 17-4PH ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END DIAMETER | 0.3408 INCHES MINIMUM AND 0.3438 INCHES MAXIMUM |
| FIRST END SPLINE LENGTH | 0.4400 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.2420 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| FIRST END SPLINE MAJOR DIAMETER | 0.3408 INCHES MINIMUM AND 0.3438 INCHES MAXIMUM |
| FIRST END PITCH DIAMETER | 0.3125 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 10 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 2 PLAIN |
| SECOND END DIAMETER | 0.3125 INCHES NOMINAL |
| SECOND END EXTERNAL THREAD LENGTH | 0.6200 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.436 INCHES NOMINAL |
| OVERALL LENGTH | 4.000 INCHES NOMINAL |
| STEP QUANTITY | 5 |
| SPECIAL FEATURES | SECOND END THREADED 5/16-24UNF-2A WITH .06W X .09D IN. SLOT |
| END ITEM IDENTIFICATION | AIRCRAFT,GALAXY C-5 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,DRIVE |