NSN 3040-00-460-1410
Part Details | SHOULDERED SHAFT
3040-00-460-1410 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 569A954P1, 569A954, 3040-00-460-1410, 00-460-1410, 3040004601410, 004601410
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 09, 1970 | 00-460-1410 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
TONGUE
PLAIN
TONGUE
Cross Reference | NSN 3040-00-460-1410
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 569A954P1 | 89954 | BAE SYSTEMS CONTROLS INC. |
| 569A954 | 89954 | BAE SYSTEMS CONTROLS INC. |
Technical Data | NSN 3040-00-460-1410
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633,C1018CD FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 0.1740 INCHES MINIMUM AND 0.1780 INCHES MAXIMUM |
| FIRST END HOLE DIAMETER | 0.09375 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 6 TONGUE |
| SECOND END DIAMETER | 0.2370 INCHES MINIMUM AND 0.2470 INCHES MAXIMUM |
| SECOND END WIDTH ACROSS FLATS | 0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| SECOND END HOLE DIAMETER | 0.0950 INCHES MINIMUM AND 0.1000 INCHES MAXIMUM |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM |
| SECOND END STEP LENGTH | 0.420 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| LARGEST STEP DIAMETER | 0.237 INCHES MINIMUM AND 0.247 INCHES MAXIMUM |
| OVERALL LENGTH | 8.790 INCHES MINIMUM AND 8.810 INCHES MAXIMUM |
| STEP QUANTITY | 2 |