NSN 3040-00-459-6675
Part Details | SHOULDERED SHAFT
3040-00-459-6675 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 5D7338, 3040-00-459-6675, 00-459-6675, 3040004596675, 004596675
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | DEC 29, 1969 | 00-459-6675 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-00-459-6675
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 5D7338 | 11083 | CATERPILLAR INC.DBA CATERPILLAR |
Technical Data | NSN 3040-00-459-6675
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 2 PLAIN |
| MATERIAL | STEEL |
| SURFACE FINISH | 20.0 MICROINCHES |
| FIRST END DIAMETER | 0.4930 INCHES NOMINAL |
| FIRST END EXTERNAL THREAD LENGTH | 0.720 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 0.9830 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 0.690 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.8960 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 0.9830 INCHES NOMINAL |
| SECOND END PITCH DIAMETER | 0.9500 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 19 |
| LARGEST STEP DIAMETER | 0.983 INCHES NOMINAL |
| OVERALL LENGTH | 4.500 INCHES NOMINAL |
| STEP QUANTITY | 4 |
| SPECIAL FEATURES | SECOND END INTERNAL UNTHD HOLE 0.188 IN. DIA,0.500 IN. DP;SECOND END UNTHD CROSS DRILLED HOLE 0.125 IN. DIA,0.328 IN. DISTANCE FROM HOLE CTR TO END,0.983 IN. HOLE DP |