NSN 3040-00-454-8901
Part Details | SHOULDERED SHAFT
3040-00-454-8901 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 353114, 3040-00-454-8901, 00-454-8901, 3040004548901, 004548901
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | APR 16, 1969 | 00-454-8901 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-00-454-8901
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 353114 | 62983 | EATON AEROSPACE LLC |
Technical Data | NSN 3040-00-454-8901
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | COPPER |
| FIRST END DIAMETER | 0.8645 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 0.7750 INCHES MINIMUM AND 0.7810 INCHES MAXIMUM |
| FIRST END SPLINE MINOR DIAMETER | 0.7070 INCHES MINIMUM AND 0.7170 INCHES MAXIMUM |
| FIRST END SPLINE MAJOR DIAMETER | 0.8620 INCHES MINIMUM AND 0.8670 INCHES MAXIMUM |
| FIRST END PITCH DIAMETER | 0.8000 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 16 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 1.2650 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 1.188 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 1.1070 INCHES MINIMUM AND 1.1190 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 1.2620 INCHES MINIMUM AND 1.2670 INCHES MAXIMUM |
| SECOND END PITCH DIAMETER | 1.2000 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 24 |
| LARGEST STEP DIAMETER | 1.155 INCHES MINIMUM AND 1.160 INCHES MAXIMUM |
| OVERALL LENGTH | 2.594 INCHES NOMINAL |
| STEP QUANTITY | 5 |