NSN 3040-00-454-2507
Part Details | SHOULDERED SHAFT
3040-00-454-2507 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 9684591, 968459-1, 3040-00-454-2507, 00-454-2507, 3040004542507, 004542507
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | APR 11, 1969 | 00-454-2507 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-00-454-2507
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 968459-1 | 99193 | HONEYWELL INTERNATIONAL INC.DBA HONEYWELL |
Technical Data | NSN 3040-00-454-2507
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6260 ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 32.0 MICROINCHES |
| FIRST END DIAMETER | 0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| FIRST END SPLINE LENGTH | 0.4800 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.3659 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| FIRST END SPLINE MAJOR DIAMETER | 0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| FIRST END PITCH DIAMETER | 0.4344 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 11 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 0.6400 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.2942 INCHES MINIMUM AND 0.3023 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| SECOND END PITCH DIAMETER | 0.3358 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 11 |
| LARGEST STEP DIAMETER | 0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| OVERALL LENGTH | 4.830 INCHES MINIMUM AND 4.850 INCHES MAXIMUM |
| STEP QUANTITY | 4 |