NSN 3040-00-012-6080
Part Details | SHOULDERED SHAFT
3040-00-012-6080 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: S6137667132, S6137-66713-2, 3040-00-012-6080, 00-012-6080, 3040000126080, 000126080
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1961 | 00-012-6080 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
TONGUE
INTERNAL THREADED
TONGUE
INTERNAL THREADED
Cross Reference | NSN 3040-00-012-6080
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| S6137-66713-2 | 78286 | SIKORSKY AIRCRAFT CORPORATIONDBA SIKORSKY |
Technical Data | NSN 3040-00-012-6080
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | INTERNAL THREADED |
| MATERIAL | STEEL COMP 4340 |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS4340 ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 16.0 MICROINCHES |
| FIRST END DIAMETER | 1.8135 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 5 TONGUE |
| SECOND END GROOVE WIDTH | 0.0940 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.6600 INCHES MINIMUM AND 0.6650 INCHES MAXIMUM |
| SECOND END DISTANCE FROM END TO GROOVE | 0.942 INCHES NOMINAL |
| SECOND END DIAMETER | 0.7500 INCHES NOMINAL |
| SECOND END HOLE DIAMETER | 0.1610 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.083 INCHES NOMINAL |
| SECOND END ANGLE BETWEEN HOLES | 90.0 DEGREES NOMINAL |
| LARGEST STEP DIAMETER | 2.430 INCHES NOMINAL |
| OVERALL LENGTH | 19.970 INCHES NOMINAL |
| STEP QUANTITY | 8 |