NSN 3040-00-008-7124
Part Details | SHOULDERED SHAFT
3040-00-008-7124 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: SMB500073, 3040-00-008-7124, 00-008-7124, 3040000087124, 000087124
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUL 23, 1972 | 00-008-7124 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-00-008-7124
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| SMB500073 | 80063 | US ARMY COMMUNICATIONS &ELECTRONICS MATERIEL READINESS |
Technical Data | NSN 3040-00-008-7124
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL COMP 303 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 16.0 MICROINCHES |
| FIRST END DIAMETER | 0.1862 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | PLAIN |
| SECOND END DIAMETER | 0.1870 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM |
| LARGEST STEP DIAMETER | 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| OVERALL LENGTH | 2.100 INCHES MINIMUM AND 2.140 INCHES MAXIMUM |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | MAJOR DIA FLATTED ON TWO SIDES TO A WIDTH OF 0.187 IN. |